Load video: Dual Adjustable Pulley DRE8021

Exercises and muscles targeted

Exercise	Muscles Targeted
Cable Fly — High Pulley	Pectoralis Major — Lower Sternal Head (primary — downward converging arc), Anterior Deltoid (secondary), Coracobrachialis (stabiliser)
Cable Fly — Mid Pulley	Pectoralis Major — Sternal Head (primary — horizontal adduction, maximum mid-chest activation), Anterior Deltoid (secondary), Serratus Anterior (stabiliser)
Cable Fly — Low Pulley	Pectoralis Major — Clavicular Head (primary — upward converging arc targets upper chest), Anterior Deltoid (increased secondary)
Cable Row — Mid or Low Pulley	Latissimus Dorsi (primary), Rhomboids, Middle Trapezius (primary — scapular retraction), Biceps Brachii (secondary), Rear Deltoid (secondary)
Cable Pushdown — High Pulley	Triceps Brachii — all three heads (primary), Anconeus (secondary), Forearm Extensors (grip stabiliser)
Cable Curl — Low Pulley	Biceps Brachii (primary), Brachialis (primary), Brachioradialis (secondary)
Cable Woodchop — High-to-Low	External Obliques (primary — rotational power generator), Internal Obliques (primary — contralateral stabiliser), Latissimus Dorsi (secondary), Rectus Abdominis (secondary stabiliser)
Cable Lateral Raise	Lateral Deltoid (primary), Supraspinatus (primary — abduction initiation), Upper Trapezius (secondary), Posterior Deltoid (secondary)
Pull-Up — Wide Pronated Grip	Latissimus Dorsi — Upper Fibres (primary — wide grip emphasises lat breadth), Teres Major (primary), Biceps Brachii (secondary), Rear Deltoid (secondary), Core (full body stabiliser)
Pull-Up — Narrow Supinated (Chin-Up)	Biceps Brachii (increased — supination loads biceps strongly), Latissimus Dorsi (primary), Brachialis (primary), Core (full body stabiliser)
Cable Hip Kickback — Low Pulley + Foot Sleeve	Gluteus Maximus (primary — hip extension against cable), Gluteus Medius — Posterior Fibres (secondary), Hamstrings (secondary stabiliser)

The DRE8021's 39 pulley positions per side and 69" column separation together determine the cable training quality the machine delivers. The 39 positions allow every exercise to be performed at the angle that optimally loads the target muscle rather than at the nearest approximation of a fixed three- or six-position system. The 69" separation provides the cable travel space for full fly movements to reach genuine pectoral stretch — in a narrower functional trainer the cable angle from a low starting pulley to the hands at hip width does not produce the same degree of pectoral stretch because the vector shortens as the cable narrows. The included foot tension sleeve extends the exercise library to lower body cable work from the same station.

Who this machine is built for

Serious Home Gym Builders
A full-scale dual-stack functional cable station with 39 adjustment positions per side, a pull-up bar with three grip widths, and an attachment storage system that keeps every cable accessory organised within reach is the most complete single-station investment in a home gym. The DRE8021 delivers all of this at 69"×43"×95" with two independent 210 lb stacks covering every cable exercise from floor to overhead across the full body. Multiple attachments are included, and the 4-position storage hooks mean no accessory is ever on the floor between exercises.

Bodybuilders and Physique Athletes
The 1.7+ metre horizontal training width allows pectoral fly movements to reach the full stretch range at the starting position that narrower functional trainers limit — the extra cable travel in the fully opened fly position is where the most productive eccentric stretch stimulus for the pectorals is generated. The 39 positions per side also allow the fly angle to be tuned precisely for each pectoral region without approximating with fixed high/mid/low positions. The included straight push handle, tension rope, and pull handles extend the arm and shoulder isolation programming available from the same station.

Commercial Gym Owners and Operators
At 912 lbs the DRE8021 stays firmly planted on the commercial floor without anchoring. The right-side step platform accommodates every user height for pull-up entry, and the 4-position attachment storage keeps the training area around the machine organised during peak commercial hours. Two independent 210 lb stacks allow two exercises at different loads to be programmed from opposite sides simultaneously, and the 39-position adjustment handles operate on high-strength spring pins with smooth rails for the fast, tool-free position changes a commercial environment demands between users.

Private Personal Training Studios
A dual-stack 39-position adjustable pulley covers more exercise variety from one station than any other piece of cable equipment in a studio floor plan — cable fly at every pectoral angle, cable row, cable pushdown and curl, woodchop and rotation patterns, lateral raises, kickbacks, pull-ups across three grip widths. The included accessories add immediate exercise variety without additional attachment purchases, and the left-side storage hooks keep the training area clean and professional-looking throughout a session.

University and College Athletic Departments
Cable training covering rotational core power, horizontal and vertical pulling, and unilateral functional patterns is standard in athletic conditioning programming. The DRE8021's independent dual stacks allow bilateral and unilateral cable work at different loads from the same station, and the 39-position range covers every cable angle required for sport-specific movement patterns — from low-pulley hip hinge patterns to high-pulley rotation and diagonal cable woodchop sequences.

Physical Therapists and Sports Medicine Practitioners
The 39-position height adjustment allows the cable angle to be set precisely for the specific joint loading direction required at each stage of a patient's rehabilitation protocol. Cable exercises that need to load a joint through a specific arc without exceeding a safe range of motion can be configured more precisely on a 39-position system than on fixed three- or six-position functional trainers. The independent stacks allow unilateral rehabilitation exercises at different loads from the two sides. Exercise selection, load, and range of motion must always follow the clinical programme specific to each patient's condition and recovery stage.

How to setup and use

Setting Up the DRE8021 Dual Adjustable Pulley

Select the working weight on the stack pin for each side independently. Both stacks are completely independent — load each side to the working weight for the exercise. For unilateral cable work use the working side's stack only. For bilateral exercises where both sides need the same load, set both stack pins to the same position.
Adjust the pulley height on each column using the small adjustment handle. Press and hold the handle to release the long elastic pin, slide the regulating tube to the desired position, and release the handle to lock the pin into the selected hole. Both left and right pulleys adjust independently — set each to the required height for the exercise.
Retrieve the required cable attachment from the 4-position storage hooks on the left side of the machine. The included accessories — short pull handle, straight push handle, tension rope, foot tension sleeve, and sleeve sets — are stored here. Hook the chosen attachment onto the gourd hook on the active cable and confirm the hook is fully engaged before loading.
For exercises using both sides simultaneously, confirm both pulleys are set to the matching heights and both attachments are secured before stepping into the working position.
For pull-up exercises, use the right-side step platform to reach the upper bar. Select the grip position — wide pronated for upper back emphasis, neutral mid-width for balanced back and arm loading, narrow supinated for chin-up. Confirm the grip is firm and secure before beginning.
Always confirm the selector pin and the adjustment pin are both fully engaged before initiating any set. Do not adjust pulley height while the cable is under load.

Performing Cable Fly

Set both pulleys to matching heights appropriate for the target pectoral region. Stand centred between the two columns and hold one handle in each hand.
Step forward to create cable tension at the starting position with both arms open — the cables should be taut with both arms extended outward before the first rep.
Bring both hands together in the converging arc appropriate to the pulley height — downward and inward for high pulley, directly inward for mid pulley, upward and inward for low pulley — keeping a slight, consistent elbow bend throughout.
Drive to the peak contraction where both hands meet at the centre line, holding for one to two seconds before the controlled return.
Return under control with the arms moving outward through the full eccentric arc. The 69" column separation allows the arms to reach a genuine pectoral stretch at the starting position — maintain cable tension through this stretch rather than letting the cables go slack.

Performing Woodchop and Rotational Patterns

Set one or both pulleys to the appropriate height for the rotational pattern — high pulley for high-to-low woodchop, low pulley for low-to-high reverse chop, mid pulley for horizontal rotation.
Stand sideways to the active column and grip the cable handle with both hands. Step away from the column to create cable tension in the starting position.
Rotate and drive the cable through the diagonal arc with the core generating the rotational power rather than the arms pulling. The core muscles — obliques and transverse abdominis — should drive the movement from the starting loaded position through to peak rotation.
Return under control through the full eccentric arc, maintaining core tension throughout the return.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Estimated delivery: 7–14 business days from order confirmation. You will receive a tracking number and a delivery window confirmation call before your shipment arrives. Deliveries are curbside standard, white glove delivery to room of choice is available at checkout.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save 10%

Dual Adjustable Pulley DRE8021

$3,419.00

$3,419.00 ~~$3,799.00~~ 10% off (Save$380.00 )

Commercial Grade
Pay With HFA/FSA

Free Shipping

Weight Stack: 420lb

420lb 500lb

The Dynasty Fitness DRE8021 Dual Adjustable Pulley is a full-scale functional cable training station with two independent 210 lb weight stacks and 39 height-adjustment positions per pulley column — a position density that covers every cable exercise angle from floor level to overhead without a fixed-position compromise, and both pulleys adjust independently so the left and right cable heights can be set differently within the same exercise for rotation, woodchop, and asymmetric functional patterns. The machine's 69" horizontal training width creates more than 1.7 metres of cable travel space between the two columns, which is specifically highlighted in the design as delivering maximum pectoral fly stretch and contraction range beyond what closer-column functional trainers allow at the same cable angle. A fixed upper bar with three biomechanically calculated grip positions — wide pronated for upper back emphasis, neutral mid-width for mid-back, and narrow supinated for focused lat engagement — turns the top of the station into a dedicated pull-up training bar, and a right-side step platform accommodates users of different heights for comfortable pull-up entry and exit. The left side carries 4-position attachment storage hooks that keep all cable accessories organised and immediately accessible during training. Multiple cable attachments are included with the machine. Built to commercial grade at 69"×43"×95" with 210 lb stacks per side and 250 lb upgrade stacks available, the DRE8021 is built for commercial gyms, personal training studios, and serious home gym setups where a dual-stack adjustable pulley with maximum positional freedom is the functional training centrepiece.

39-position height adjustment per pulley on high-strength spring pins with ultra-smooth adjustment rails means every cable exercise can be performed at the exact height that optimises the resistance angle for the target muscle — not the closest of three fixed positions — and both pulleys adjust independently for exercises that require different left and right cable heights within the same movement
Over 1.7 metres of horizontal training space between columns provides cable fly, crossover, and functional movement patterns the full stretch range that narrower-column functional trainers limit through available cable travel distance — the extra width is load-bearing throughout the full pectoral stretch and peak contraction
Fixed upper bar with three biomechanically calculated grip positions covers wide pronated pull-ups for upper back breadth, neutral mid-width pulls for mid-back, and narrow supinated chin-ups for lat depth and biceps — full pull-up variety from a pull-up step platform that accommodates every user height without a jump start
Left-side 4-position attachment storage and included cable accessories — short pull handle, straight push handle, tension rope, foot tension sleeve, and sleeve sets — keep every attachment organised and reachable throughout the training session without a separate storage solution

Limited time offer

Get 20% off when you order 4 or more pieces of equipment!

Exercises and muscles targeted

Exercise	Muscles Targeted
Cable Fly — High Pulley	Pectoralis Major — Lower Sternal Head (primary — downward converging arc), Anterior Deltoid (secondary), Coracobrachialis (stabiliser)
Cable Fly — Mid Pulley	Pectoralis Major — Sternal Head (primary — horizontal adduction, maximum mid-chest activation), Anterior Deltoid (secondary), Serratus Anterior (stabiliser)
Cable Fly — Low Pulley	Pectoralis Major — Clavicular Head (primary — upward converging arc targets upper chest), Anterior Deltoid (increased secondary)
Cable Row — Mid or Low Pulley	Latissimus Dorsi (primary), Rhomboids, Middle Trapezius (primary — scapular retraction), Biceps Brachii (secondary), Rear Deltoid (secondary)
Cable Pushdown — High Pulley	Triceps Brachii — all three heads (primary), Anconeus (secondary), Forearm Extensors (grip stabiliser)
Cable Curl — Low Pulley	Biceps Brachii (primary), Brachialis (primary), Brachioradialis (secondary)
Cable Woodchop — High-to-Low	External Obliques (primary — rotational power generator), Internal Obliques (primary — contralateral stabiliser), Latissimus Dorsi (secondary), Rectus Abdominis (secondary stabiliser)
Cable Lateral Raise	Lateral Deltoid (primary), Supraspinatus (primary — abduction initiation), Upper Trapezius (secondary), Posterior Deltoid (secondary)
Pull-Up — Wide Pronated Grip	Latissimus Dorsi — Upper Fibres (primary — wide grip emphasises lat breadth), Teres Major (primary), Biceps Brachii (secondary), Rear Deltoid (secondary), Core (full body stabiliser)
Pull-Up — Narrow Supinated (Chin-Up)	Biceps Brachii (increased — supination loads biceps strongly), Latissimus Dorsi (primary), Brachialis (primary), Core (full body stabiliser)
Cable Hip Kickback — Low Pulley + Foot Sleeve	Gluteus Maximus (primary — hip extension against cable), Gluteus Medius — Posterior Fibres (secondary), Hamstrings (secondary stabiliser)

Who this machine is built for

How to setup and use

Setting Up the DRE8021 Dual Adjustable Pulley

Select the working weight on the stack pin for each side independently. Both stacks are completely independent — load each side to the working weight for the exercise. For unilateral cable work use the working side's stack only. For bilateral exercises where both sides need the same load, set both stack pins to the same position.
Adjust the pulley height on each column using the small adjustment handle. Press and hold the handle to release the long elastic pin, slide the regulating tube to the desired position, and release the handle to lock the pin into the selected hole. Both left and right pulleys adjust independently — set each to the required height for the exercise.
Retrieve the required cable attachment from the 4-position storage hooks on the left side of the machine. The included accessories — short pull handle, straight push handle, tension rope, foot tension sleeve, and sleeve sets — are stored here. Hook the chosen attachment onto the gourd hook on the active cable and confirm the hook is fully engaged before loading.
For exercises using both sides simultaneously, confirm both pulleys are set to the matching heights and both attachments are secured before stepping into the working position.
For pull-up exercises, use the right-side step platform to reach the upper bar. Select the grip position — wide pronated for upper back emphasis, neutral mid-width for balanced back and arm loading, narrow supinated for chin-up. Confirm the grip is firm and secure before beginning.
Always confirm the selector pin and the adjustment pin are both fully engaged before initiating any set. Do not adjust pulley height while the cable is under load.

Performing Cable Fly

Set both pulleys to matching heights appropriate for the target pectoral region. Stand centred between the two columns and hold one handle in each hand.
Step forward to create cable tension at the starting position with both arms open — the cables should be taut with both arms extended outward before the first rep.
Bring both hands together in the converging arc appropriate to the pulley height — downward and inward for high pulley, directly inward for mid pulley, upward and inward for low pulley — keeping a slight, consistent elbow bend throughout.
Drive to the peak contraction where both hands meet at the centre line, holding for one to two seconds before the controlled return.
Return under control with the arms moving outward through the full eccentric arc. The 69" column separation allows the arms to reach a genuine pectoral stretch at the starting position — maintain cable tension through this stretch rather than letting the cables go slack.

Performing Woodchop and Rotational Patterns

Set one or both pulleys to the appropriate height for the rotational pattern — high pulley for high-to-low woodchop, low pulley for low-to-high reverse chop, mid pulley for horizontal rotation.
Stand sideways to the active column and grip the cable handle with both hands. Step away from the column to create cable tension in the starting position.
Rotate and drive the cable through the diagonal arc with the core generating the rotational power rather than the arms pulling. The core muscles — obliques and transverse abdominis — should drive the movement from the starting loaded position through to peak rotation.
Return under control through the full eccentric arc, maintaining core tension throughout the return.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Dual Adjustable Pulley DRE8021

$3,419.00

$3,419.00 ~~$3,799.00~~ 10% off (Save$380.00 )

Key Features

39-Position Height Adjustment

Each pulley column adjusts across 39 positions on high-strength spring pin mechanisms running in ultra-smooth adjustment rails. The spring pin design releases and locks with a single-hand handle press, allowing position changes in seconds without tools. The 39-position density means the difference in cable angle between adjacent positions is small enough to be functionally meaningful — the cable angle at position 19 genuinely differs from position 20 in a way that changes the resistance vector on the target muscle. Standard functional trainers with 12 to 20 positions space their positions further apart, which forces exercises to approximate the correct height rather than hit it precisely. Both columns adjust independently, which is the feature that unlocks rotational and diagonal cable patterns where the two pulleys need to be at different heights within the same exercise.

1.7+ Metre Horizontal Training Space

The 69" distance between the two columns is specifically called out as a design differentiator. Most dual-stack functional trainers in the same class measure 50 to 60 inches between columns — a difference that is mechanically significant for cable fly exercises. At a wider column separation, the cable vector at the fully-opened starting position of a fly is more horizontal, which produces a greater pectoral stretch under tension before the adduction begins. At a narrower column separation, the cable angle at the same starting position is steeper, which reduces the effective stretch range. The 1.7+ metre separation ensures the fly stretch phase loads the pectorals from a genuine lengthened starting position at every cable height the 39-position system provides.

Three-Position Pull-Up Bar

The upper fixed bar provides three distinct grip positions — wide pronated, neutral mid-width, and narrow supinated with each angle calculated through biomechanics to align with the natural muscle force curve of the target back muscles at that grip width. The wide pronated grip positions the shoulder in the external rotation orientation that loads the upper lats broadly through horizontal adduction from a wide starting arm position. The neutral mid-width grip distributes loading across the mid and upper lats with a balanced biceps involvement. The narrow supinated grip places the shoulder in the position that maximises biceps contribution through supination, making it the chin-up grip for combined lat and biceps development. The right-side step platform allows every user height to reach the bar without a jump start, which also allows a safer, controlled starting position for the first rep rather than initiating from a dynamic jump under full bodyweight.

4-Position Attachment Storage System

The left side of the machine carries a hook rack with four storage positions for cable attachments. The included accessories — short pull handle, straight push handle, tension rope, foot tension sleeve, tensile sleeve sets, and long tension sleeve sets — are all designed to hang on these hooks. Having the attachments stored at the machine rather than on the floor or on a separate rack means the transition between exercises within a session requires only reaching to the hook, not walking to a separate storage unit. The four positions accommodate the full set of included accessories plus additional aftermarket attachments.

Two Independent Weight Stacks

The left and right stacks each carry independent 210 lb weight stacks with independent selector pins. No mechanical connection exists between the two sides — loading, adjusting, or working one stack has no effect on the other. The independence enables unilateral cable work at different loads per side, bilateral cable exercises where each arm works against its own stack, rotational patterns where only one stack is loaded, and simultaneous dual-user programming during commercial sessions. Both stacks offer 250 lb upgrade capacity.

Product Information
Product Name	Dual Adjustable Pulley
Model	DRE8021
Series	DRE80 Selectorized Series
Product Type	Dual-Stack Adjustable Functional Cable Trainer
Functions	Cable fly, cable row, cable pushdown, cable curl, cable lateral raise, woodchop, rotational patterns, unilateral cable exercises, pull-ups, chin-ups
Grade	Commercial
Colour	Black
Dimensions and Weight
Length (column separation)	69 in (175.3 cm) — 1.7+ m horizontal training space
Width	43 in (109.2 cm)
Height	95 in (240.5 cm)
Net Weight	912 lbs (414 kg)
Weight Stacks
Standard Weight Stack	210 lbs per side (two independent stacks)
Upgraded Weight Stack	250 lbs per side
Stack Configuration	Fully independent — each side adjustable to different working weights
Pulley System
Pulley Positions per Column	39 positions — floor to overhead
Adjustment Mechanism	High-strength spring pins — ultra-smooth adjustment rails, single-hand handle
Cable Attachments (included)	Short pull handle, straight push handle, tension rope, foot tension sleeve, tensile sleeve sets x2, long tension sleeve sets x2, gourd hooks x5
Attachment Storage	4-position storage hooks — left side
Bearings	608-2Z x16, copper bearings x6
Pull-Up Bar
Grip Positions	3 positions — wide pronated, neutral mid-width, narrow supinated
Grip Angles	Biomechanically calculated — each angle matched to muscle force curve
Step Platform	Right side — accommodates users of all heights for pull-up access
Frame and Construction
Frame	Cage rack with left and right stand frames, upper connection frame
Indoor Use Only	Yes

Q: What does 39-position pulley adjustment deliver that a standard 12 or 20-position functional trainer does not?
A: A 12 or 20-position system spaces its stops approximately every 10 to 15 centimetres in height. For most exercises this is close enough, but for precision angle targeting — setting the cable exactly at mid-chest versus slightly above for different pectoral fibre emphasis, or hitting the exact shoulder height for a lateral raise versus a fraction above — the step size is too large to split the difference. The 39-position system on the DRE8021 halves the step size, providing position density close enough that the optimum height for any exercise is never more than half a position away. Both columns also adjust independently, which the 39-position system makes practical for rotational and diagonal exercises where the two pulleys need to be at genuinely different heights.

Q: Why does the 69" column separation matter for cable fly exercises?
A: When you stand centred between two cable columns and open your arms for the starting position of a fly, the cable angle from the pulley to your hand changes with the distance between the columns. With a wider separation, the cable runs more horizontally to the hand in the opened starting position, which means the resistance direction at the stretch is more closely aligned with the horizontal adduction path the pectoral needs to pull against. With a narrower separation, the cable angle steepens, which means a component of the resistance is pulling the arm in a direction the pectoral is not optimised to load at that stretch position. The 69" separation on the DRE8021 — designed to be wider than comparable machines on the market — ensures the cable vector at the fully opened starting position loads the pectoral in its adduction path rather than partially downward or upward.

Q: What are the three pull-up bar grip positions and what does each one train differently?
A: The wide pronated grip loads the latissimus dorsi through shoulder adduction from a wide starting arm position, which emphasises the upper and outer lat fibres and builds the visual width of the back seen from the rear. The neutral mid-width grip distributes the pulling load more evenly across the mid and upper lats with moderate biceps involvement — the balanced lat and arm pulling stimulus most users respond to best for overall back thickness. The narrow supinated grip places the forearm in full supination, which strongly recruits the biceps brachii through the supinated elbow flexion component of the chin-up, producing the highest combined lat and biceps stimulus across the three positions. Each grip angle on the DRE8021 bar was calculated through biomechanics to align with the natural muscle force curve of the target muscles at that grip width.

Q: What cable accessories are included with the DRE8021?
A: The DRE8021 includes a short pull handle assembly, a straight push handle, a tension rope, a foot tension sleeve for lower body cable exercises, two tensile sleeve sets, and two long tension sleeve sets — stored on the 4-position hook rack on the left side of the machine. These attachments cover the primary cable exercise categories from the start — pulling, pushing, rope-based exercises, foot/ankle work, and extended grip options — without requiring immediate additional accessory purchases.

Q: Can I use both sides of the DRE8021 at different pulley heights in the same exercise?
A: Yes. The left and right sliding frames are completely independent — each adjusts via its own adjustment rail and spring pin handle without any mechanical connection to the opposite side. This independence is what enables diagonal cable woodchop patterns where the pulling side and the resistance side need to be at different heights, and rotational exercises where the cable angle differs between the two hands. It also enables unilateral exercises where only one side is loaded, with the other side's pulley sitting at a different height for a subsequent exercise without requiring adjustment between sets.

Q: What Dynasty Fitness machines pair with the DRE8021 for a complete cable and functional training area?
A: The DRE8021 covers functional cable training across the full height range from both sides simultaneously. The Adjustable Cable Crossover DRE8024 expands the cable training zone with a dedicated crossover station and a wider column separation for maximum fly range, connecting directly to the DRE8023 Functional Trainer in a combined commercial cable area. For dedicated selectorized pressing and isolation work alongside the DRE8021's cable volume, the ISO-Lateral Chest Press DRE8001 covers bilateral and unilateral chest pressing and the ISO-Lateral Shoulder Press DRE8004 covers overhead pressing — both providing the fixed-arc machine precision that complements the free-path cable resistance of the DRE8021.

Commercial Selectorized Machines. Engineered to Perform.

Dynasty Resistance Elite

The Dynasty Resistance Elite is Dynasty Fitness's flagship selectorized series, built around the Dynasty Flex-Stack System that delivers a true 1:1 felt weight ratio across the majority of the lineup. What you select on the stack is exactly what you lift, giving every session accurate, progressive resistance from the first rep to the last.

The series covers the complete commercial training floor. ISO-lateral pressing and pulling machines including the ISO-Lateral Chest Press, ISO-Lateral Shoulder Press, and ISO-Lateral Seated Row train each side of the body independently through its own natural arc, eliminating the compensation that fixed bilateral machines allow. Dedicated lower body stations including the Leg Press/Hack Squat, Leg Curl/Leg Extension and Glute Drive cover compound and isolation lower body training from selectorized stations built for heavy daily volume. A complete cable training ecosystem spans from the Adjustable Cable Crossover and Dual Adjustable Pulley through to the 4-Stack, 5-Stack, and 8-Stack Multi Station systems for facilities that need multiple concurrent training zones.

Every machine is built from heavy-duty commercial steel, finished in matte black, and backed by Dynasty's lifetime frame warranty. This is commercial-grade equipment at a price point that makes it accessible to every serious training environment.

Explore the Elite Series

Commercial Machines, Home Gym Prices

Commercially Engineered, Available to All

OUR COMMITMENT

Every machine that leaves Dynasty Fitness carries the same promise: it is built to the commercial standard that professional training environments demand, priced so that standard is no longer exclusive to them, and backed by the support and warranty coverage that a long-term training investment deserves.

We are committed to equipment that stands the test of time — and to making sure the people who train the hardest have access to the tools that match their effort.