Load video: Leg Curl Leg Extension DRE8025 3D View

DRE8025 Leg Curl & Extension Machine Adjustable, durable leg trainer.

Side View of Leg Curl & Extension DRE8025 Machine Adjustable, durable leg trainer.

DRE8025 Leg Curl & Extension Machine dimensions 60.3" L x 46" W x 63.1" H.

Exercises and muscles targeted

Exercise	Muscles Targeted
Seated Leg Extension	Rectus Femoris (primary — only quadriceps muscle crossing both hip and knee), Vastus Lateralis (primary), Vastus Medialis (primary — VMO peak activation in terminal extension), Vastus Intermedius (primary), Tibialis Anterior (stabiliser at ankle contact)
Seated Leg Curl	Biceps Femoris — Long and Short Heads (primary), Semimembranosus (primary), Semitendinosus (primary), Gastrocnemius (secondary — plantarflexion stabiliser at ankle contact), Popliteus (secondary)
Leg Extension — Isometric Hold (terminal)	Vastus Medialis (VMO — peak isometric contraction at full extension, primary), Rectus Femoris, Vastus Lateralis, Vastus Intermedius (sustained isometric), Tibialis Anterior (sustained ankle stabiliser)
Leg Curl — Isometric Hold (peak)	Biceps Femoris, Semimembranosus, Semitendinosus (sustained isometric at maximum knee flexion), Gastrocnemius (co-contraction), Popliteus (sustained)
Leg Extension — Slow Eccentric	Quadriceps — all four heads (eccentric lengthening from full extension through to starting position, maximum hypertrophy stimulus), Dynasty Flex-Stack 1:1 ratio maintains consistent resistance through the full eccentric return
Leg Curl/Extension Superset	Quadriceps (extension phase) and Hamstrings (curl phase) — complete quad and hamstring isolation volume from one station, agonist-antagonist superset without machine or weight changes

The DRE8025 covers the two fundamental knee isolation patterns from a single selectorized station. The leg extension trains the quadriceps through knee extension in isolation — the only exercise where all four quadriceps heads are the sole primary movers. The seated leg curl trains the hamstrings through knee flexion in a seated position where the hip is flexed, which allows high training volume without the balance and lower back demands of standing or kneeling curl alternatives. The Dynasty Flex-Stack System ensures that in both exercises, the 1:1 felt weight ratio delivers the same training quality at every increment of the stack, making progressive overload tracking reliable across both quad and hamstring sessions over a training cycle.

Who this machine is built for

Serious Home Gym Builders
You need leg extension and leg curl covered without buying two machines or managing two weight stacks. The DRE8025 handles both from a 60.3"×46.0" footprint with a single 210 lb stack and the Dynasty Flex-Stack System delivering a true 1:1 felt weight ratio through both exercises. The multi-dimensional adjustment system fits your proportions precisely for both movements, and the quick-adjust handle means you switch between exercises without getting off the machine.

Bodybuilders and Physique Athletes
Quad sweep, VMO definition, and hamstring bicep femoris development are all built through progressive isolation loading that compound movements cannot provide at the same muscle specificity. The DRE8025's biomechanically tested pivot point aligns the resistance arc with the knee joint's natural axis, which produces cleaner quad and hamstring contraction through the full range than machines with fixed or approximated pivot geometry. The 1:1 felt weight ratio means the resistance progression tracking is accurate — a 5 lb increase on the stack is a genuine 5 lb increase in what the muscle works against, not an approximation filtered through a leveraging system.

Commercial Gym Owners and Operators
A dual-function leg curl and extension machine that runs a true 1:1 felt weight ratio through both exercises serves the most demanding members in a commercial facility alongside the casual ones, because there is no stack-weight ambiguity between what is selected and what is felt. The zero-slack design, the multi-dimensional adjustment system, and the quick-adjust handle without dismounting all reduce the time each user spends on the machine per set, which improves throughput on one of the most-used lower body isolation stations in any commercial gym.

Powerlifters and Strength Athletes
Leg extension and leg curl volume as accessories to competition squat and deadlift training build the quadriceps terminal extension strength and hamstring knee flexion strength that barbell training develops incompletely at equivalent volume. The DRE8025's 1:1 felt weight ratio makes the accessory programming precise — you know exactly what load the quads and hamstrings are working against each session, which allows the same progressive overload logic applied to the competition lifts to apply equally to the isolation work.

University and College Athletic Departments
Quad and hamstring isolation training is standard in athletic S&C programming for knee joint health, rehabilitation return-to-play protocols, and agonist-antagonist strength balance assessment. The DRE8025's biomechanically tested pivot point and zero-slack design produce consistent, joint-safe resistance curves in both directions. The multi-dimensional adjustment system covers the full range of athlete proportions without separate machine configuration, and the superset capability between leg curl and extension allows coaches to train both sides of the knee joint in the same station block efficiently.

Physical Therapists and Sports Medicine Practitioners
Seated leg extension and seated leg curl in a machine-guided environment with precise pivot alignment are standard components of knee rehabilitation and quadriceps/hamstring strength restoration protocols. The biomechanically tested pivot on the DRE8025 reduces shear force at the knee joint through the movement arc compared to machines with approximated pivot geometry. The 4+3-position knee joint adjustment and 7-position ankle pad allow the working range to be restricted to the clinically safe arc for each stage of a patient's recovery. Exercise selection, load, and range of motion must always follow the clinical programme specific to each patient's condition.

How to setup and use

Setting Up for Leg Extension

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio, so the selected weight is the actual resistance the quads work against — start conservatively for the first session to calibrate the correct quad working weight before progressing.
Rotate the semi-circular leg pad upward and away from the working position so it does not contact the shin or interfere with the ankle pad during the extension. The pad locks in the stored position and does not require manual holding during the set.
Set the ankle pad to one of seven positions so it contacts the front of the lower shin just above the ankle in a comfortable position. The correct contact point keeps the resistance line aligned with the leg through the full extension arc.
Set the knee joint adjustment to the appropriate position for the extension using the 4-position range. The correct position aligns the machine's pivot axis with your knee joint centre.
Set the 8-position backrest so the lower back is fully supported and the knees sit slightly in front of the seat edge, resting on the thickened front section of the two-stage seat.
Grip the handles beneath the seat firmly before beginning. Confirm the ankle pad and seat contact feel stable before initiating the first rep.

Performing the Leg Extension

From the starting position with the knees bent at approximately 90 degrees, extend both legs simultaneously by contracting the quadriceps, driving the ankle pad upward through the full extension arc.
Drive to full knee extension at the top where the quads reach peak contraction, holding for one to two seconds to maximise VMO activation before beginning the return.
Lower under control over at least two seconds, maintaining resistance contact through the full eccentric return. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through this lowering phase, which is where a significant portion of the quad hypertrophy stimulus is generated.

Setting Up for Leg Curl

Rotate the semi-circular leg pad back down into the working position so it contacts the back of the upper thigh and provides stable thigh contact throughout the curl arc.
Set the knee joint adjustment to the appropriate position for the curl using the 3-position range. Slide the ankle pad to the position behind the lower calf that allows a comfortable curl without the pad slipping during the set.
Set the 5-position leg pad position so the semi-circular pad holds the thigh firmly against the seat without cutting into the back of the knee.
Use the quick-adjust handle to make any fine seat or backrest changes needed for the curl position without dismounting. Grip the dual top handles firmly before beginning.
From the starting position with the legs extended, curl both legs simultaneously toward the seat by contracting the hamstrings, following the arc of the reversing frame mechanism.
Drive to full knee flexion at the peak, hold for one to two seconds, then return under control over at least two to three seconds before the next rep.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Estimated delivery: 7–14 business days from order confirmation. You will receive a tracking number and a delivery window confirmation call before your shipment arrives. Deliveries are curbside standard, white glove delivery to room of choice is available at checkout.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save 10%

Leg Curl/Leg Extension DRE8025

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Commercial Grade
Pay With HFA/FSA

Free Shipping

Stack: 210lb

210lb 250lb 275lb

The Dynasty Fitness DRE8025 Leg Curl/Leg Extension is a dual-function selectorized machine that trains the quadriceps through a seated leg extension and the hamstrings through a seated leg curl from one station, powered by the Dynasty Flex-Stack System — an internal pulley design that delivers a true 1:1 felt weight ratio through both exercises so the resistance selected on the stack is the resistance the legs work against, without the weight loss that cam-based and leverage-heavy machines produce at mid-range. The pivot point was determined through extensive data sampling and biomechanical testing to align precisely with the knee joint's natural movement axis, which is the mechanical basis for the clean, joint-friendly feel the machine produces under heavy loads in both exercise directions. A zero-slack resistance travel design engages the weight from the first millimeter of movement on every rep, and a 4+3-position knee joint adjustment combined with a 7-position ankle pad and 5-position leg pad creates a multi-dimensional fit system that accommodates the full range of user proportions precisely. An 8-position backrest, two-stage seat with thickened front for knee support, and a semi-circular leg pad that rotates away during extension sets complete a machine designed to remove every friction point from serious leg isolation training. Built to commercial grade at 60.3"×46.0"×63.1" with a 210 lb standard stack and a 250 lb upgrade option available through Dynasty Fitness, the DRE8025 is built for commercial gyms, personal training studios, and serious home gym setups where both quad and hamstring isolation belong on the same station.

Dual-function selectorized leg curl and leg extension machine powered by the Dynasty Flex-Stack System, delivering a true 1:1 felt weight ratio through both exercises so the quads and hamstrings work against the actual stack weight rather than the reduced resistance that cam-driven and leverage-based machines deliver at mid-range
Pivot point position determined through extensive data sampling and biomechanical testing to align precisely with the knee joint's natural movement axis, producing a mechanically correct arc in both the curl and the extension that protects the joint and maximises quad and hamstring activation through the full range
Zero-slack resistance travel design engages the weight from the first millimeter of movement at the start of every rep, eliminating the dead zone at the beginning of each set that conventional leg machines produce and ensuring every rep delivers a full stimulus from one to failure
Multi-dimensional adjustment system across 4+3-position knee joint, 7-position ankle pad, 5-position leg pad, and 8-position backrest precisely fits users of every proportion for both exercises, with a semi-circular leg pad that rotates away for unobstructed leg extension and a quick-adjust handle that allows changes without dismounting

Limited time offer

Get 20% off when you order 4 or more pieces of equipment!

Exercises and muscles targeted

Exercise	Muscles Targeted
Seated Leg Extension	Rectus Femoris (primary — only quadriceps muscle crossing both hip and knee), Vastus Lateralis (primary), Vastus Medialis (primary — VMO peak activation in terminal extension), Vastus Intermedius (primary), Tibialis Anterior (stabiliser at ankle contact)
Seated Leg Curl	Biceps Femoris — Long and Short Heads (primary), Semimembranosus (primary), Semitendinosus (primary), Gastrocnemius (secondary — plantarflexion stabiliser at ankle contact), Popliteus (secondary)
Leg Extension — Isometric Hold (terminal)	Vastus Medialis (VMO — peak isometric contraction at full extension, primary), Rectus Femoris, Vastus Lateralis, Vastus Intermedius (sustained isometric), Tibialis Anterior (sustained ankle stabiliser)
Leg Curl — Isometric Hold (peak)	Biceps Femoris, Semimembranosus, Semitendinosus (sustained isometric at maximum knee flexion), Gastrocnemius (co-contraction), Popliteus (sustained)
Leg Extension — Slow Eccentric	Quadriceps — all four heads (eccentric lengthening from full extension through to starting position, maximum hypertrophy stimulus), Dynasty Flex-Stack 1:1 ratio maintains consistent resistance through the full eccentric return
Leg Curl/Extension Superset	Quadriceps (extension phase) and Hamstrings (curl phase) — complete quad and hamstring isolation volume from one station, agonist-antagonist superset without machine or weight changes

Who this machine is built for

How to setup and use

Setting Up for Leg Extension

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio, so the selected weight is the actual resistance the quads work against — start conservatively for the first session to calibrate the correct quad working weight before progressing.
Rotate the semi-circular leg pad upward and away from the working position so it does not contact the shin or interfere with the ankle pad during the extension. The pad locks in the stored position and does not require manual holding during the set.
Set the ankle pad to one of seven positions so it contacts the front of the lower shin just above the ankle in a comfortable position. The correct contact point keeps the resistance line aligned with the leg through the full extension arc.
Set the knee joint adjustment to the appropriate position for the extension using the 4-position range. The correct position aligns the machine's pivot axis with your knee joint centre.
Set the 8-position backrest so the lower back is fully supported and the knees sit slightly in front of the seat edge, resting on the thickened front section of the two-stage seat.
Grip the handles beneath the seat firmly before beginning. Confirm the ankle pad and seat contact feel stable before initiating the first rep.

Performing the Leg Extension

From the starting position with the knees bent at approximately 90 degrees, extend both legs simultaneously by contracting the quadriceps, driving the ankle pad upward through the full extension arc.
Drive to full knee extension at the top where the quads reach peak contraction, holding for one to two seconds to maximise VMO activation before beginning the return.
Lower under control over at least two seconds, maintaining resistance contact through the full eccentric return. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through this lowering phase, which is where a significant portion of the quad hypertrophy stimulus is generated.

Setting Up for Leg Curl

Rotate the semi-circular leg pad back down into the working position so it contacts the back of the upper thigh and provides stable thigh contact throughout the curl arc.
Set the knee joint adjustment to the appropriate position for the curl using the 3-position range. Slide the ankle pad to the position behind the lower calf that allows a comfortable curl without the pad slipping during the set.
Set the 5-position leg pad position so the semi-circular pad holds the thigh firmly against the seat without cutting into the back of the knee.
Use the quick-adjust handle to make any fine seat or backrest changes needed for the curl position without dismounting. Grip the dual top handles firmly before beginning.
From the starting position with the legs extended, curl both legs simultaneously toward the seat by contracting the hamstrings, following the arc of the reversing frame mechanism.
Drive to full knee flexion at the peak, hold for one to two seconds, then return under control over at least two to three seconds before the next rep.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Leg Curl/Leg Extension DRE8025

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Key Features

Dynasty Flex-Stack System

The DRE8025 runs on the Dynasty Flex-Stack System, an internal pulley design developed to deliver a true 1:1 felt weight ratio through both the leg extension and leg curl. Most selectorized leg machines use cam or leverage systems where the felt resistance drops below the selected stack weight at mid-range, which is precisely where the quadriceps and hamstrings are working hardest through their peak strength window. The Dynasty Flex-Stack System uses a precision internal pulley arrangement to offset these losses, so the resistance felt during the set matches the weight selected on the stack throughout the full arc of both exercises. Felt weight may vary slightly based on ankle pad position due to changes in lever arm length, but the 1:1 design eliminates the systematic under-resistance that cam-based alternatives produce.

Biomechanically Tested Pivot Point

The knee joint pivot position on the DRE8025 was determined through extensive data sampling and biomechanical testing rather than from a standard industry pivot convention. The pivot point is positioned to align precisely with the natural movement axis of the knee joint during both extension and flexion, which keeps the resistance arc mechanically correct through the full working range. A pivot point that does not align with the knee's true movement axis creates a shifting load that the joint structures compensate for across every rep, which reduces training efficiency and increases joint stress at heavier loads. The tested pivot eliminates this misalignment for both exercises from the same pivot geometry.

Zero-Slack Resistance Travel Design

The zero-slack system ensures the weight stack engages from the very first millimeter of ankle pad movement at the start of each rep in both the extension and the curl. Many leg machines have cable slack built into the neutral starting position, meaning the first portion of each rep is unloaded and the quads or hamstrings only begin working once the slack is taken up. This dead zone shortens the effective training range and misleads load tracking because the muscle is working against less than the selected weight for the early portion of every rep. The zero-slack design on the DRE8025 means the full selected load is active from rep initiation through to the end of the eccentric return.

Multi-Dimensional Adjustment System

Four separate adjustment axes fit the DRE8025 to each user's proportions for both exercises: 4+3-position knee joint adjustment, 7-position ankle pad, 5-position leg pad, and 8-position backrest. This adjustment density is significantly higher than standard single-function leg machines, which typically provide two to four total adjustment points. The 4+3-position knee joint covers both the extension and curl pivot requirements with different position counts for each exercise, ensuring the pivot alignment is correct for both movements independently. The 7-position ankle pad covers the range of lower leg lengths from shorter to taller users without the ankle pad contacting the joint itself, and the 8-position backrest covers the sitting height variations that determine where the knee falls relative to the machine's pivot during both exercises.

Semi-Circular Leg Pad

The leg pad uses a semi-circular profile that wraps around the back of the upper thigh during the leg curl, maintaining contact across a wider thigh surface area than a flat cylindrical pad. A flat pad makes contact at a single point and can shift or lose contact at the peak of the curl arc when the thigh is most loaded. The semi-circular surface maintains even thigh contact through the full curl, which keeps the force transfer consistent from the first rep to the last. During leg extension, the pad rotates upward and locks in a stored position that clears the shin completely, so there is no pad interference during the extension movement without needing to remove or reattach any component.

Two-Stage Seat Design

The seat combines a thickened front section with a standard rear section, creating a height difference between the front and rear of the seating surface. The thickened front section provides elevated knee joint support that keeps the distal thigh slightly raised relative to the proximal thigh during the exercise. This geometry reduces the tendency for the pelvis to lift off the rear of the seat during the leg extension drive and keeps the knee joint stable at the front edge of the seat where the quad force is transmitted to the ankle pad. A quick-adjust handle allows seat height and position changes between exercises without the user having to dismount, which maintains training flow during superset programming.

Product Information
Product Name	Leg Curl/Leg Extension
Model	DRE8025
Series	DRE80 Selectorized Series
Product Type	Selectorized Dual-Function Leg Curl and Leg Extension Machine
Functions	Seated leg extension and seated leg curl
Target Muscles	Quadriceps — all four heads (extension), Hamstrings — Biceps Femoris, Semimembranosus, Semitendinosus (curl)
Resistance System	Dynasty Flex-Stack System — 1:1 felt weight ratio
Resistance Engagement	Zero-slack resistance travel design — immediate from first millimeter of movement
Grade	Commercial
Colour	Black
Dimensions and Weight
Length	60.3 in (153.0 cm)
Width	46.0 in (117.0 cm)
Height	63.1 in (160.2 cm)
Net Weight	571 lbs (259 kg)
Weight Stack
Standard Weight Stack	210 lbs
Upgraded Weight Stack	250 lbs — contact Dynasty Fitness
Adjustability
Knee Joint Adjustment	4+3 positions — 4 for leg extension, 3 for leg curl
Ankle Pad Positions	7 positions
Leg Pad Positions	5 positions — semi-circular profile, rotates to storage for extension
Backrest Positions	8 positions
Seat Design	Two-stage — thickened front section for knee joint support
Adjustment Access	Quick-adjust handle — changes without dismounting
Mechanism and Pulleys
Pulleys	4.5" pulley x4, 3.5" pulley x1, V-pulley x1
Bearings	6005-2Z x8
Frame and Construction
Main Frame Tubing	1.97"×5.9"×0.1" rectangular steel
Movement Arm Tubing	Φ2.4"×0.1"
Indoor Use Only	Yes

Q: What is the Dynasty Flex-Stack System and why does it matter on a leg curl and extension machine?
A: The Dynasty Flex-Stack System is the internal pulley design that delivers a true 1:1 felt weight ratio — the weight selected on the stack is the resistance the quads or hamstrings work against through the full arc of both exercises. Most selectorized leg machines use cam systems that reduce the felt weight below the selected stack weight through the mid-range of the movement, which is where the quadriceps and hamstrings are producing peak force. The Flex-Stack system offsets this loss so the resistance is accurate and consistent from start to finish in both directions. Felt weight may vary slightly based on ankle pad position due to changes in lever arm length, but the 1:1 design eliminates the systematic under-resistance that standard cam-based machines produce.

Q: How is the 4+3-position knee joint adjustment different from a standard adjustment?
A: The 4+3-position system provides separate adjustment ranges for each exercise rather than a single adjustment shared across both. The 4-position range covers the knee joint alignment needs of the leg extension, and the 3-position range covers the curl. This matters because the knee joint's ideal pivot alignment differs slightly between a knee extension motion and a knee flexion motion, and a single shared adjustment that approximates both introduces alignment compromise in at least one exercise. The separate ranges allow the pivot to be set correctly for whichever exercise is being performed.

Q: Why does the leg pad rotate away for leg extensions?
A: During leg extension, the ankle pad contacts the front of the shin while the leg is driven upward. The semi-circular leg pad used for curl training contacts the back of the thigh and would interfere with the shin and lower leg during an extension if it remained in the working position. Rotating it upward and locking it in storage clears the leg entirely so the extension arc is completely unobstructed. The rotation mechanism requires no tools and takes a single hand movement, so switching from curl to extension setup does not slow down the transition between exercises.

Q: What does zero-slack resistance travel mean for leg training specifically?
A: In both leg extension and leg curl, many machines have cable slack built into the neutral starting position — the legs move through the first few degrees of the arc before any resistance engages. This dead zone means each rep has an unloaded opening portion, and the effective training range per rep is shorter than the actual movement range. The zero-slack design on the DRE8025 means the selected stack weight is active from the very first degree of movement in both exercises, which makes every rep fully loaded from initiation through to the end of the eccentric return.

Q: Can I train leg curl and extension in the same session as a superset on this machine?
A: Yes, and this is one of the most effective ways to programme the DRE8025. Agonist-antagonist supersets between quad and hamstring isolation are a standard technique in bodybuilding and hypertrophy programming because one muscle group can recover while the opposing group is working. Switching between leg extension and curl on the DRE8025 requires rotating the leg pad, adjusting the ankle pad position, and making a minor knee joint adjustment — all single-hand operations that can be done without dismounting using the quick-adjust handle. The weight stack requires no change if both exercises use the same working load.

Q: What Dynasty Fitness machines pair with the DRE8025 for a complete leg training area?
A: The DRE8025 covers quad isolation through leg extension and hamstring isolation through seated leg curl. Pair it with the Leg Press/Hack Squat DRE8016 for compound bilateral leg pressing that develops quad and glute strength at heavier loads alongside the isolation work. The Prone Leg Curl DRE8015 adds hamstring training in the hip-extended position that produces a different muscle activation profile from the seated curl, complementing the DRE8025's seated curl function. The Glute Drive DRE8022 adds horizontal hip extension for gluteus maximus isolation to complete the full lower body selectorized training area.

Commercial Selectorized Machines. Engineered to Perform.

Dynasty Resistance Elite

The Dynasty Resistance Elite is Dynasty Fitness's flagship selectorized series, built around the Dynasty Flex-Stack System that delivers a true 1:1 felt weight ratio across the majority of the lineup. What you select on the stack is exactly what you lift, giving every session accurate, progressive resistance from the first rep to the last.

The series covers the complete commercial training floor. ISO-lateral pressing and pulling machines including the ISO-Lateral Chest Press, ISO-Lateral Shoulder Press, and ISO-Lateral Seated Row train each side of the body independently through its own natural arc, eliminating the compensation that fixed bilateral machines allow. Dedicated lower body stations including the Leg Press/Hack Squat, Leg Curl/Leg Extension and Glute Drive cover compound and isolation lower body training from selectorized stations built for heavy daily volume. A complete cable training ecosystem spans from the Adjustable Cable Crossover and Dual Adjustable Pulley through to the 4-Stack, 5-Stack, and 8-Stack Multi Station systems for facilities that need multiple concurrent training zones.

Every machine is built from heavy-duty commercial steel, finished in matte black, and backed by Dynasty's lifetime frame warranty. This is commercial-grade equipment at a price point that makes it accessible to every serious training environment.

Explore the Elite Series

Commercial Machines, Home Gym Prices

Commercially Engineered, Available to All

OUR COMMITMENT

Every machine that leaves Dynasty Fitness carries the same promise: it is built to the commercial standard that professional training environments demand, priced so that standard is no longer exclusive to them, and backed by the support and warranty coverage that a long-term training investment deserves.

We are committed to equipment that stands the test of time — and to making sure the people who train the hardest have access to the tools that match their effort.