What exercises can I perform on the DRE8034 and how do the 14 pivot positions change them?

The primary exercise categories are chest flyes at different pectoral angles, standing lateral raises, bent-over rear delt raises, and front raises. Each of the 14 pivot height positions changes the arc the handles travel through, which changes the resistance direction relative to the shoulder joint and therefore which muscle fibres receive the greatest loading at peak contraction. Lower pivot positions produce an upward converging arc for lower chest fibres, mid-height positions produce horizontal adduction for the sternal chest, and higher positions produce the downward arc for upper chest and the correct elevation plane for lateral raises and bent-over rear delt work. The 13-position adjustment disc independently sets the handle's starting angle at each pivot height to accommodate different arm lengths and correct the starting extension position for each exercise configuration.

What do the self-rotating handle covers do and why are they important for fly exercises?

During a chest fly or lateral raise, the forearm and wrist naturally rotate slightly as the arm moves through the arc — this is the same rotational motion that occurs in natural overhead throwing and reaching movements. When a handle is fixed in one position, the wrist must resist this natural rotation through the full arc, which creates torque at the wrist and elbow joints and can cause discomfort and technique breakdown at heavier loads. The self-rotating handles on the DRE8034 spin freely so the grip follows the forearm's natural rotation without friction. This eliminates the wrist and elbow torque, allows the shoulder to move naturally through the arc, and keeps the chest and deltoid muscles as the working muscles rather than the wrist and forearm stabilisers.

How is this different from a pectoral fly machine like the DRE8003?

The DRE8003 Pectoral Fly/Rear Deltoid is a seated selectorized machine with a fixed arc and seat-anchored position, covering chest fly and rear deltoid fly from one seated station with adjustable arm position and dual handle orientations. The DRE8034 is a standing machine with a fully configurable 14-position pivot that covers not just chest fly but the complete shoulder isolation library — lateral raises, bent-over rear delt raises, and front raises — from a standing position that requires and develops balance and core stability alongside the target muscle work. For seated, high-isolation, heavy chest fly training the DRE8003 is the choice. For the full standing chest and shoulder training variety the DRE8034 is the choice.

What Dynasty Fitness machines pair with the DRE8034 for a complete chest and shoulder training area?

The DRE8034 covers the full fly and raise isolation library for the pectorals and all three deltoid heads. Pair it with the ISO-Lateral Chest Press DRE8001 for bilateral and unilateral horizontal pressing that provides the compound pressing volume the fly machine isolates around. The Pectoral Fly/Rear Deltoid DRE8003 adds a seated chest fly and seated rear delt fly option for users who prefer the seated chest-supported position for fly work. The ISO-Lateral Shoulder Press DRE8004 completes the shoulder development programme with vertical overhead pressing for deltoid mass alongside the lateral, rear, and front raise isolation the DRE8034 provides. Together these four machines cover every chest and shoulder exercise category from dedicated selectorized stations.

Load video: Standing Multi Flight DRE8034

Exercises and muscles targeted

The 14-position pivot height is what makes the DRE8034 a complete chest and shoulder station rather than a single exercise machine. Each pivot changes the arc direction relative to the shoulder, shifting which chest or deltoid fibres carry the primary load, while the 13-position disc sets the handle start angle for each user.

Exercise	Muscles Targeted
Standing Decline Fly (low pivot)	Pectoralis Major — Lower Sternal Head (primary), Anterior Deltoid (secondary)
Standing Mid Fly (mid pivot)	Pectoralis Major — Sternal Head (primary), Anterior Deltoid, Serratus Anterior (secondary)
Standing Upper Fly (high pivot)	Pectoralis Major — Clavicular Head (primary), Anterior Deltoid (increased secondary)
Standing Lateral Raise	Lateral Deltoid, Supraspinatus (primary), Upper Trapezius, Posterior Deltoid (secondary)
Bent-Over Rear Delt Fly	Posterior Deltoid (primary), Infraspinatus, Teres Minor, Middle Trapezius, Rhomboids (secondary)
Front Raise	Anterior Deltoid (primary), Clavicular Pectoralis Major, Upper Trapezius (secondary)

How to setup and use

Setting Up the DRE8034

Select your working weight; fly and raise work typically uses lighter loads than pressing.
Set the pivot to one of 14 positions for your target exercise and chest region.
Adjust the disc to one of 13 positions to set your handle starting angle.
Stand on the footboard with both feet stable for a grounded base.
Grip both rotating handles and confirm the cable is taut before starting.

Performing Standing Fly

From extended arms at your chosen pivot, converge your hands toward centre.
Keep a slight, consistent elbow bend; the movement is shoulder adduction.
Hold briefly at peak contraction, then return under control through the full arc.

Performing Lateral Raise or Bent-Over Rear Delt

Set the pivot for shoulder abduction or bent-over rear delt height.
Raise both arms through the arc, leading with the elbows.
For bent-over work, brace against the head pad and return under control.

Watch the Standing Multi Flight DRE8034 In Action

Who this machine is built for

Serious home gym builders: Covers every chest fly and shoulder raise variation available in a fully equipped gym from one 56"x40" standing station.

Bodybuilders and physique athletes: 14 pivot positions target lower, mid, and upper chest plus all three deltoid heads with precise, repeatable resistance arcs.

Commercial gym owners: Extends chest and shoulder isolation coverage without a cable crossover or additional cable tower on the floor.

Personal training studios: Precise pivot and disc targeting lets trainers correct specific fibre weaknesses without complex form coaching.

Physical therapists and sports medicine practitioners: The shoulder-matched arc supports rotator cuff and impingement rehabilitation, with range following the practitioner's programme.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Estimated delivery: 7–14 business days from order confirmation. You will receive a tracking number and a delivery window confirmation call before your shipment arrives. Deliveries are curbside standard, white glove delivery to room of choice is available at checkout.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save 11%

Standing Multi Flight DRE8034

$2,699.00

$2,699.00 ~~$3,049.00~~ 11% off (Save$350.00 )

Commercial Grade
Pay With HFA/FSA

Free Shipping

The DRE8034 Standing Multi Flight is a selectorized chest and shoulder machine built around a 14-position pivot height and 13-position adjustment disc that together configure the arc for decline flyes, lateral raises, front raises, and bent-over rear delt work. The arc stays aligned with the shoulder's natural rotational path throughout.

Built at 56"x40"x73" with a 200 lb Dynasty Flex-Stack stack at a true 1:1 ratio, the DRE8034 covers the full chest and shoulder isolation library from one standing station.

182 arc configurations: 14 pivot heights and 13 disc positions cover every chest and shoulder isolation angle from one machine.
Shoulder-matched arc: Resistance stays aligned with the shoulder's natural rotational path, reducing joint stress through every exercise.
Self-rotating handles: Spin freely with your forearm's natural rotation, eliminating the wrist torque fixed handles create.
True 1:1 Flex-Stack resistance: The 200 lb stack loads exactly as selected through light isolation and heavy fly and raise sessions alike.

How to Assemble the Standing Multi Flight Machine DRE8034

Limited time offer

Get 20% off when you order 4 or more pieces of equipment!

Exercises and muscles targeted

Exercise	Muscles Targeted
Standing Decline Fly (low pivot)	Pectoralis Major — Lower Sternal Head (primary), Anterior Deltoid (secondary)
Standing Mid Fly (mid pivot)	Pectoralis Major — Sternal Head (primary), Anterior Deltoid, Serratus Anterior (secondary)
Standing Upper Fly (high pivot)	Pectoralis Major — Clavicular Head (primary), Anterior Deltoid (increased secondary)
Standing Lateral Raise	Lateral Deltoid, Supraspinatus (primary), Upper Trapezius, Posterior Deltoid (secondary)
Bent-Over Rear Delt Fly	Posterior Deltoid (primary), Infraspinatus, Teres Minor, Middle Trapezius, Rhomboids (secondary)
Front Raise	Anterior Deltoid (primary), Clavicular Pectoralis Major, Upper Trapezius (secondary)

How to setup and use

Setting Up the DRE8034

Select your working weight; fly and raise work typically uses lighter loads than pressing.
Set the pivot to one of 14 positions for your target exercise and chest region.
Adjust the disc to one of 13 positions to set your handle starting angle.
Stand on the footboard with both feet stable for a grounded base.
Grip both rotating handles and confirm the cable is taut before starting.

Performing Standing Fly

From extended arms at your chosen pivot, converge your hands toward centre.
Keep a slight, consistent elbow bend; the movement is shoulder adduction.
Hold briefly at peak contraction, then return under control through the full arc.

Performing Lateral Raise or Bent-Over Rear Delt

Set the pivot for shoulder abduction or bent-over rear delt height.
Raise both arms through the arc, leading with the elbows.
For bent-over work, brace against the head pad and return under control.

Watch the Standing Multi Flight DRE8034 In Action

Who this machine is built for

Serious home gym builders: Covers every chest fly and shoulder raise variation available in a fully equipped gym from one 56"x40" standing station.

Bodybuilders and physique athletes: 14 pivot positions target lower, mid, and upper chest plus all three deltoid heads with precise, repeatable resistance arcs.

Commercial gym owners: Extends chest and shoulder isolation coverage without a cable crossover or additional cable tower on the floor.

Personal training studios: Precise pivot and disc targeting lets trainers correct specific fibre weaknesses without complex form coaching.

Physical therapists and sports medicine practitioners: The shoulder-matched arc supports rotator cuff and impingement rehabilitation, with range following the practitioner's programme.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Standing Multi Flight DRE8034

$2,699.00

$2,699.00 ~~$3,049.00~~ 11% off (Save$350.00 )

Key Features

14-Position Pivot Height and 13-Position Disc

The pivot moves the arm's rotation point across 14 positions, changing the arc for each fly and raise variation. The 13-position disc independently sets the handle start angle for different arm lengths. Together they produce 182 distinct exercise configurations from one machine.

Arc-Shaped Movement Pattern

The arc is aligned with the shoulder joint's natural rotational anatomy rather than a straight-line path. When resistance does not follow this arc, the shoulder must deviate from its natural trajectory, generating abnormal joint stress that the DRE8034's designed alignment minimises.

Self-Rotating Handle Covers

The grip surface spins freely as the forearm naturally rotates through a fly or raise arc. A fixed handle resists this rotation, creating torque at the wrist and elbow. The rotating cover removes that resistance so the chest and deltoids stay the working muscles.

Head/Shoulder Cushion Pad

The pad supports bent-over exercises where the torso holds a forward angle across multiple sets. Without it, the lower back sustains a static isometric load that fatigues before the target muscle does. The pad transfers that demand away from the lower back.

High-Strength Cable System

A 5mm seven-strand nine-line cable rated to 9000N breaking strength, paired with precision guide rods and linear bearings, keeps the arc smooth and consistent under the full 200 lb stack across every pivot and disc configuration.

Product Information
Product Name	Standing Multi Flight
Model	DRE8034
Series	DRE80 Selectorized Series
Product Type	Selectorized Standing Multi-Function Fly and Raise Machine
Functions	Decline fly, mid fly, upper fly, lateral raise, bent-over lateral raise, front raise — 14-position pivot × 13-position disc
Target Muscles	Pectoralis Major — all fibre regions (fly), Lateral Deltoid, Posterior Deltoid, Anterior Deltoid (raise variations)
Grade	Commercial
Colour	Black
Dimensions and Weight
Length	56 in (142.0 cm)
Width	40 in (102.0 cm)
Height	73 in (185.5 cm)
Net Weight	644 lbs (292 kg)
Weight Stack
Standard Weight Stack	200 lbs
Resistance System	Dynasty Flex-Stack System — 1:1 felt weight ratio
Stack Material	High-density cast iron — black textured powder coating, wear and corrosion resistant
Adjustment System
Pivot Height Positions	14 positions — decline fly through lateral raise and bent-over height
Adjustment Disc Positions	13 positions — handle starting angle per user arm length
Total Configurations	182 distinct pivot × disc combinations
Movement and Handle System
Movement Pattern	Arc-shaped — biomechanically aligned with shoulder joint anatomy
Handle Type	Self-rotating covers — free palm rotation through full arc, no friction
Support Pad	Head/shoulder cushion — bent-over fly and lateral raise support
Standing Platform	Footboard and foot pedal
Cable System
Cable Specification	5mm diameter — seven-strand nine-line, oil-impregnated steel wire, PA exterior, 9000N breaking strength
Guide Rods	φ19×2.0×1319mm × 2
Linear Bearings	φ47×φ30×68mm × 2
Frame and Construction
Air Springs	× 2
Indoor Use Only	Yes

Q: How do the 14 pivot positions change what I'm training?
A: Each pivot changes the arc direction relative to the shoulder. Lower positions target lower chest fibres, mid-height positions train the sternal chest, and higher positions target upper chest and set the correct plane for lateral raises and bent-over rear delt work.

Q: What do the self-rotating handles do?
A: Your forearm naturally rotates slightly as your arm moves through a fly or raise arc. A fixed handle resists this, creating torque at the wrist and elbow. The rotating handles spin freely with your forearm, keeping the chest and deltoids as the working muscles.

Q: How is this different from the DRE8003 Pectoral Fly/Rear Deltoid?
A: The DRE8003 is a seated machine with a fixed arc for chest fly and rear deltoid fly. The DRE8034 is a standing machine with a fully configurable 14-position pivot covering the full shoulder isolation library, including lateral and front raises, while also developing standing balance and core stability.

Q: What is the head/shoulder cushion pad for?
A: It supports bent-over exercises like rear delt raises, where your torso holds a forward angle across multiple sets. Without it, your lower back sustains a static hold that fatigues before your target muscle does. The pad transfers that demand away from your lower back.

Q: How many exercise configurations does this machine actually offer?
A: The 14 pivot positions combined with the 13 disc positions produce 182 distinct arc configurations, covering decline through upper chest fly and every shoulder raise variation from lateral to front to bent-over rear delt, all from one station.

Q: What Dynasty Fitness machines pair with the DRE8034 for complete chest and shoulder training?
A: Pair this with an ISO-Lateral Chest Press for compound pressing volume, a Pectoral Fly/Rear Deltoid for seated chest-supported fly work, and an ISO-Lateral Shoulder Press for vertical overhead pressing to complete the shoulder programme.

Commercial Selectorized Machines. Engineered to Perform.

Dynasty Resistance Elite

The Dynasty Resistance Elite is Dynasty Fitness's flagship selectorized series, built around the Dynasty Flex-Stack System that delivers a true 1:1 felt weight ratio across the majority of the lineup. What you select on the stack is exactly what you lift, giving every session accurate, progressive resistance from the first rep to the last.

The series covers the complete commercial training floor. ISO-lateral pressing and pulling machines including the ISO-Lateral Chest Press, ISO-Lateral Shoulder Press, and ISO-Lateral Seated Row train each side of the body independently through its own natural arc, eliminating the compensation that fixed bilateral machines allow. Dedicated lower body stations including the Leg Press/Hack Squat, Leg Curl/Leg Extension and Glute Drive cover compound and isolation lower body training from selectorized stations built for heavy daily volume. A complete cable training ecosystem spans from the Adjustable Cable Crossover and Dual Adjustable Pulley through to the 4-Stack, 5-Stack, and 8-Stack Multi Station systems for facilities that need multiple concurrent training zones.

Every machine is built from heavy-duty commercial steel, finished in matte black, and backed by Dynasty's lifetime frame warranty. This is commercial-grade equipment at a price point that makes it accessible to every serious training environment.

Explore the Elite Series

Commercial Machines, Home Gym Prices

Commercially Engineered, Available to All

OUR COMMITMENT

Every machine that leaves Dynasty Fitness carries the same promise: it is built to the commercial standard that professional training environments demand, priced so that standard is no longer exclusive to them, and backed by the support and warranty coverage that a long-term training investment deserves.

We are committed to equipment that stands the test of time — and to making sure the people who train the hardest have access to the tools that match their effort.