Exercises and muscles targeted

Exercise	Muscles Targeted
Biceps Curl — Reverse Grip (supinated)	Biceps Brachii — Long Head (peak contraction emphasis, primary), Biceps Brachii — Short Head (primary), Brachialis (secondary), Brachioradialis (secondary), Anterior Deltoid (minimised by arm pad angle pre-contraction)
Hammer Curl (neutral grip)	Brachialis (primary — neutral forearm position maximises brachialis recruitment), Brachioradialis (primary), Biceps Brachii (secondary — reduced supination reduces direct biceps emphasis), Forearm Extensors (stabiliser)
Biceps Curl — Isometric Hold (peak)	Biceps Brachii — Long and Short Head (sustained isometric at full elbow flexion — maximum peak contraction and biceps height stimulus), Brachialis (co-contraction), Anterior Deltoid (minimised by arm pad contact)
Biceps Curl — Slow Eccentric	Biceps Brachii (eccentric lengthening from peak contraction through to full arm extension — maximum hypertrophy stimulus), Brachialis (eccentric), Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through the full lowering arc
Hammer Curl — Isometric Hold	Brachialis (sustained isometric at peak flexion), Brachioradialis (sustained), Biceps Brachii (secondary co-contraction), Forearm extensors (sustained stabiliser)
Reverse Grip/Hammer Grip Superset	Biceps Brachii (reverse grip phase), Brachialis (hammer grip phase) — complete upper arm development covering both biceps peak height and brachialis thickness from one station without changing machines

The DRE8006 covers the two distinct curl training stimuli that complete upper arm development requires. The reverse supinated grip curl with the arm pad's anti-compensation angle maximises biceps brachii activation through the full curl arc, producing the peak contraction that builds the height and definition of the biceps. The hammer grip curl shifts the primary emphasis onto the brachialis — a muscle that sits beneath the biceps and pushes it upward when developed — and the brachioradialis that contributes to forearm and outer arm thickness. Neither grip substitutes for the other. Both together from the same machine cover the complete arm curl pattern without requiring separate stations.

Who this machine is built for

Serious Home Gym Builders
You want a dedicated arm curl machine that covers both biceps supinated curl work and hammer grip brachialis training from one station without managing a cable setup or a barbell. The DRE8006 delivers both from a 58"×45" footprint with a 210 lb stack, the Dynasty Flex-Stack System's 1:1 felt weight ratio, and a dual-pivot design that makes the curl feel mechanically correct regardless of your forearm length. Progressive load tracking is accurate and setup is instant with the single-hand pneumatic seat.

Bodybuilders and Physique Athletes
Biceps peak height and the width of the upper arm visible from the front in competition are two different qualities developed by two different muscles. The biceps brachii long head drives the peak. The brachialis beneath it drives the width that pushes the biceps higher as it develops. The DRE8006 trains both through dedicated grip positions on the same machine, with the arm pad angle specifically engineered to remove deltoid compensation that reduces the isolated biceps stimulus at heavier loads. The dual-pivot design also allows heavier working weights with better joint alignment than single-pivot machines, which is the combination that produces the progressive overload necessary for arm hypertrophy.

Commercial Gym Owners and Operators
A dedicated selectorized biceps curl machine is among the most frequently used single-muscle isolation stations in commercial facilities. The DRE8006's dual-pivot and arm pad angle make it the technically superior alternative to a standard preacher curl or single-pivot selectorized arm machine, and the dual-handle system serves both general biceps training and brachialis-focused sessions from the same station. The pneumatic rack-and-pinion seat adjusts between users in seconds without tools, and at 553 lbs the machine stays firmly in position on the commercial floor without anchoring.

Private Personal Training Studios
The arm pad's anti-compensation angle does a significant portion of the coaching job automatically — it positions the arm so the deltoid pre-contracts before the curl begins, which structurally prevents it from taking over as a prime mover during the set. This is the compensation pattern that trainers spend the most time correcting during arm isolation work. The DRE8006 removes the need for continuous deltoid compensation cues, freeing the trainer to focus on contraction quality, rep tempo, and load progression across the arm session.

University and College Athletic Departments
Elbow flexion strength contributes to pulling power in rowing, wrestling, climbing, and any sport requiring arm drive. The dual-pivot design on the DRE8006 reduces joint shear forces through the curl arc compared to single-pivot machines, making it a lower-risk option for building elbow flexor volume in athlete populations where joint health is a programming priority. The hammer grip option also develops the brachioradialis, which is a forearm stabiliser relevant to racquet sports, throwing sports, and combat sports where grip endurance is a conditioning factor.

Physical Therapists and Sports Medicine Practitioners
The dual-pivot design specifically reduces joint shear forces through the curl arc — the mechanical force that acts across the elbow joint perpendicular to the bone axis — which is the force that creates elbow stress during conventional single-pivot curl machines. This makes the DRE8006 relevant for elbow flexor strengthening in patients who are sensitive to conventional curl machine mechanics. The arm pad's controlled pre-contraction guidance also reduces the tendency to recruit the shoulder into the curl pattern during early loading phases. Exercise selection, load, and range of motion must always follow the clinical programme specific to each patient's condition and recovery stage.

How to setup and use

Setting Up the DRE8006 Biceps Curl

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio — the selected weight is the actual resistance the biceps work against. Start conservatively for the first session to establish the correct curl path and arm pad contact before increasing load.
Adjust the seat height using the pneumatic lever with a single hand. The correct position places the elbows on the arm pad so the forearms are approximately parallel to the floor in the starting position with the arms extended — not so low that the shoulders lift off the pad, and not so high that the elbows slide forward off the pad during the curl.
Sit on the seat pad and place both upper arms firmly against the arm pad. The arm pad angle will naturally guide the anterior deltoid into a pre-contracted position. Allow this — it is the position that prevents the deltoid from taking over as the arms curl upward under load.
Choose the handle type: reverse grip for biceps brachii supinated curl training, or hammer grip for brachialis and brachioradialis emphasis. The grip selection changes the forearm rotation and therefore the primary muscle targeted.
Confirm the elbows feel anchored on the pad and the arm pad contact is comfortable across both arms before beginning the first rep. The pad should support the full length of the upper arm from the elbow to the mid-humerus.
Grip the selected handles firmly with equal pressure across both hands before initiating the set.

Performing the Exercise

From the starting position with arms extended and the upper arms in firm contact with the arm pad, curl both forearms upward simultaneously by contracting the biceps or brachialis depending on the grip selected.
Keep the upper arms pressed against the arm pad throughout the full curl arc. If the elbows lift off the pad during the concentric drive, the deltoid is compensating for biceps fatigue — reduce the load and re-establish pad contact before continuing.
Curl to full elbow flexion at the peak where the biceps or brachialis reaches maximum contraction, squeezing for one to two seconds before beginning the return.
Lower under control over at least two to three seconds, maintaining full arm pad contact through the eccentric return. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through the full lowering arc, which is where a significant portion of the biceps hypertrophy stimulus is generated.
Lower to the full starting position where the arms are fully extended and the biceps are at their longest length before the next rep. Do not cut the eccentric short — the stretched starting position is where the most mechanically productive part of the resistance arc begins.
For superset training between reverse and hammer grip, switch handles between sets without changing the stack or the seat position. Both grips are accessible from the same seated position.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Estimated delivery: 7–14 business days from order confirmation. You will receive a tracking number and a delivery window confirmation call before your shipment arrives. Deliveries are curbside standard, white glove delivery to room of choice is available at checkout.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save 10%

Biceps Curl DRE8006

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Commercial Grade
Pay With HFA/FSA

Free Shipping

Weight Stack: 210lb

210lb 250lb

The Dynasty Fitness DRE8006 Biceps Curl is a selectorized arm curl machine with a dual-pivot design that precisely matches the elbow joint's natural movement pattern regardless of the user's forearm length, so the curl arc feels mechanically correct from the first degree of movement to peak contraction rather than fighting the resistance path at the wrist or shoulder during the set. A precisely engineered arm pad angle guides a controlled anterior deltoid pre-contraction that prevents the deltoid from taking over as the primary mover when the biceps fatigues under heavy loads — keeping the curl stimulus on the target muscle through the full working set rather than distributing it across the arm and shoulder as the weight increases. A dual-handle design extends the training range further: the reverse grip trains the biceps brachii through the supinated curl path, and the hammer grip shifts the primary emphasis toward the brachialis for the depth of arm thickness that biceps work alone does not produce. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio throughout, and a pneumatic rack-and-pinion seat adjusts single-handed with zero movement under load. Built to commercial grade at 58"×45"×63" with a 210 lb standard stack and a 250 lb upgrade option available through Dynasty Fitness, the DRE8006 is built for commercial gyms, personal training studios, and serious home gym setups where biomechanically precise selectorized arm curl training with both supinated and hammer grip function is a programming priority.

Dual-pivot design matched to the elbow joint's natural movement pattern regardless of forearm length, so the curl arc feels mechanically correct for every user rather than creating wrist or shoulder strain at the points where a fixed single-pivot machine diverges from the joint's actual path
Precisely engineered arm pad angle guides anterior deltoid pre-contraction to prevent the deltoid from compensating as the biceps fatigues, keeping the curl stimulus on the target muscle through every rep of every set at any working weight
Dual-handle system with reverse grip for biceps brachii supinated curl work and hammer grip for brachialis emphasis — the two exercises that together develop both the height and the thickness of the upper arm from a single station
Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio with pneumatic rack-and-pinion single-hand seat adjustment that holds position under load, making progressive overload tracking accurate and session setup frictionless

Limited time offer

Get 20% off when you order 4 or more pieces of equipment!

Exercises and muscles targeted

Exercise	Muscles Targeted
Biceps Curl — Reverse Grip (supinated)	Biceps Brachii — Long Head (peak contraction emphasis, primary), Biceps Brachii — Short Head (primary), Brachialis (secondary), Brachioradialis (secondary), Anterior Deltoid (minimised by arm pad angle pre-contraction)
Hammer Curl (neutral grip)	Brachialis (primary — neutral forearm position maximises brachialis recruitment), Brachioradialis (primary), Biceps Brachii (secondary — reduced supination reduces direct biceps emphasis), Forearm Extensors (stabiliser)
Biceps Curl — Isometric Hold (peak)	Biceps Brachii — Long and Short Head (sustained isometric at full elbow flexion — maximum peak contraction and biceps height stimulus), Brachialis (co-contraction), Anterior Deltoid (minimised by arm pad contact)
Biceps Curl — Slow Eccentric	Biceps Brachii (eccentric lengthening from peak contraction through to full arm extension — maximum hypertrophy stimulus), Brachialis (eccentric), Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through the full lowering arc
Hammer Curl — Isometric Hold	Brachialis (sustained isometric at peak flexion), Brachioradialis (sustained), Biceps Brachii (secondary co-contraction), Forearm extensors (sustained stabiliser)
Reverse Grip/Hammer Grip Superset	Biceps Brachii (reverse grip phase), Brachialis (hammer grip phase) — complete upper arm development covering both biceps peak height and brachialis thickness from one station without changing machines

Who this machine is built for

How to setup and use

Setting Up the DRE8006 Biceps Curl

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio — the selected weight is the actual resistance the biceps work against. Start conservatively for the first session to establish the correct curl path and arm pad contact before increasing load.
Adjust the seat height using the pneumatic lever with a single hand. The correct position places the elbows on the arm pad so the forearms are approximately parallel to the floor in the starting position with the arms extended — not so low that the shoulders lift off the pad, and not so high that the elbows slide forward off the pad during the curl.
Sit on the seat pad and place both upper arms firmly against the arm pad. The arm pad angle will naturally guide the anterior deltoid into a pre-contracted position. Allow this — it is the position that prevents the deltoid from taking over as the arms curl upward under load.
Choose the handle type: reverse grip for biceps brachii supinated curl training, or hammer grip for brachialis and brachioradialis emphasis. The grip selection changes the forearm rotation and therefore the primary muscle targeted.
Confirm the elbows feel anchored on the pad and the arm pad contact is comfortable across both arms before beginning the first rep. The pad should support the full length of the upper arm from the elbow to the mid-humerus.
Grip the selected handles firmly with equal pressure across both hands before initiating the set.

Performing the Exercise

From the starting position with arms extended and the upper arms in firm contact with the arm pad, curl both forearms upward simultaneously by contracting the biceps or brachialis depending on the grip selected.
Keep the upper arms pressed against the arm pad throughout the full curl arc. If the elbows lift off the pad during the concentric drive, the deltoid is compensating for biceps fatigue — reduce the load and re-establish pad contact before continuing.
Curl to full elbow flexion at the peak where the biceps or brachialis reaches maximum contraction, squeezing for one to two seconds before beginning the return.
Lower under control over at least two to three seconds, maintaining full arm pad contact through the eccentric return. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through the full lowering arc, which is where a significant portion of the biceps hypertrophy stimulus is generated.
Lower to the full starting position where the arms are fully extended and the biceps are at their longest length before the next rep. Do not cut the eccentric short — the stretched starting position is where the most mechanically productive part of the resistance arc begins.
For superset training between reverse and hammer grip, switch handles between sets without changing the stack or the seat position. Both grips are accessible from the same seated position.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Biceps Curl DRE8006

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Key Features

Dual-Pivot Design

The curl mechanism operates on two pivot points rather than the single pivot used on standard selectorized arm curl machines. A single pivot produces a curl arc that is geometrically fixed, which means it aligns with the natural elbow joint path at only one point in the arc and diverges from it as the forearm moves toward and away from that position. Users with longer or shorter forearms relative to the machine's design point experience this as wrist strain or an unnatural pulling sensation through parts of the curl. The dual-pivot design adjusts the mechanical arc through the curl so it follows the elbow joint's actual movement pattern regardless of forearm length, producing a natural curl feel and reducing joint shear forces for every user across the range of arm proportions in a commercial population.

Arm Pad Angle and Anterior Deltoid Pre-Contraction

The arm pad is positioned at a precisely engineered angle that places the anterior deltoid in a partially contracted state before the curl begins. When the anterior deltoid is already shortened at the start of the movement, it has less capacity to contribute additional force as the biceps fatigues through a heavy set. This is the structural mechanism that prevents deltoid compensation — rather than relying on the user to consciously prevent shoulder involvement, the arm pad geometry makes deltoid takeover mechanically less available. The result is that the biceps carries the curl stimulus from the first rep through to failure rather than sharing increasing amounts of it with the deltoid as the set progresses.

Dual-Handle System

The reverse supinated grip positions the forearm in full supination through the curl, which places the biceps brachii in its strongest mechanical position for generating elbow flexion force. Peak biceps contraction at full supination is higher than at any other forearm rotation, which is why the supinated curl is the most direct biceps development exercise. The hammer neutral grip positions the forearm between full supination and full pronation, which shifts primary recruitment away from the biceps and onto the brachialis and brachioradialis. The brachialis is a pure elbow flexor that sits under the biceps — developing it pushes the biceps upward and outward, adding visible arm thickness and width that supinated curl work alone does not produce.

Dynasty Flex-Stack System

The DRE8006 runs on the Dynasty Flex-Stack System, delivering a true 1:1 felt weight ratio throughout both the reverse and hammer curl arcs. Single-pivot selectorized curl machines frequently use a cam that reduces felt weight at different points in the arc, particularly at the bottom of the curl where the biceps is most stretched and where the hypertrophy stimulus from the loaded eccentric is greatest. The Flex-Stack System maintains consistent resistance from the fully stretched starting position through to peak contraction and back down, so every part of the curl arc delivers a genuine training stimulus rather than a mechanically reduced approximation of the selected stack weight.

Pneumatic Rack-and-Pinion Seat

The seat adjusts through a pneumatic-assisted rack-and-pinion mechanism with single-hand operation. The pneumatic assist removes the resistance from the mechanical adjustment, and the rack-and-pinion toothed lock holds the seat at the selected height with zero movement under the arm load during curling sets. Seat stability matters significantly on a curl machine because a seat that shifts during a heavy set changes the elbow position relative to the arm pad — which disrupts the arm pad's anti-compensation geometry and allows deltoid involvement that the pad angle was designed to prevent.

Counter Poise Block

A counter poise block is integrated into the arm mechanism to balance the mechanical weight of the arm frame and handle assembly, ensuring the resistance felt through the handles comes from the stack rather than from the physical weight of the unloaded arm frame. Without this counterbalance, the arm assembly's own mechanical weight would add to the felt resistance at the bottom of the curl and subtract from it at the top, creating an inconsistent load curve that the Dynasty Flex-Stack System cannot fully offset. The counter poise block removes this variable, keeping the felt resistance curve clean and the 1:1 ratio accurate through the full arc.

Product Information
Product Name	Biceps Curl
Model	DRE8006
Series	DRE80 Selectorized Series
Product Type	Selectorized Biceps Curl Machine
Function	Seated biceps curl — reverse grip and hammer grip
Target Muscles	Biceps Brachii (reverse grip primary), Brachialis, Brachioradialis (hammer grip primary)
Resistance System	Dynasty Flex-Stack System — 1:1 felt weight ratio
Grade	Commercial
Colour	Black
Dimensions and Weight
Length	58 in (147.8 cm)
Width	45 in (115.1 cm)
Height	63 in (160.2 cm)
Net Weight	553 lbs (251 kg)
Weight Stack
Standard Weight Stack	210 lbs
Upgraded Weight Stack	250 lbs — contact Dynasty Fitness
Biomechanics and Mechanism
Curl Mechanism	Dual-pivot design — matched to elbow joint movement pattern regardless of forearm length
Arm Pad	Precisely engineered angle — guides anterior deltoid pre-contraction, prevents compensatory movement
Arm Balance	Counter poise block — balances arm frame weight for accurate 1:1 felt ratio
Handles and Grip
Reverse Grip	Supinated — targets Biceps Brachii long and short head
Hammer Grip	Neutral — targets Brachialis and Brachioradialis
Seat and Adjustability
Seat Adjustment	Pneumatic rack-and-pinion — single-hand, zero movement under load
Bearings	6005-2Z x4
Frame and Construction
Main Frame Tubing	1.97"×5.9"×0.1" rectangular steel
Movement Arm Tubing	Φ2.4"×0.1"
Indoor Use Only	Yes

Q: What does the dual-pivot design change about the curl compared to a standard selectorized biceps machine?
A: A standard selectorized curl machine uses a single pivot point that produces a fixed circular arc. This arc aligns with the elbow's natural movement path at one specific forearm length, and diverges from it for users who are longer or shorter than that design point — creating wrist strain or an unnatural pulling sensation through parts of the curl. The dual-pivot design on the DRE8006 adjusts the mechanical arc through the movement so it follows the elbow joint's actual path regardless of forearm length. The practical result is a curl that feels natural from start to finish for every user, with reduced joint shear forces throughout.

Q: How does the arm pad angle prevent deltoid compensation?
A: The arm pad is angled to place the anterior deltoid in a partially shortened state before the curl begins. When the deltoid is already in a shortened position at the start of the movement, it has less capacity to generate additional force as the biceps fatigues toward the end of a heavy set — the mechanical window for deltoid compensation is structurally reduced. On machines without this geometry, the deltoid activates progressively as the biceps fatigues through a set, effectively taking over as a secondary driver. The DRE8006 prevents this through pad geometry rather than relying on voluntary technique control.

Q: When should I use the reverse grip versus the hammer grip?
A: Use the reverse supinated grip when the primary goal is biceps brachii development — the peak height, the separation at the top, and the fullness of the biceps from the front. Supination places the biceps in its mechanically strongest position for elbow flexion and produces the highest peak contraction of any curl variation. Use the hammer neutral grip when the goal is brachialis and brachioradialis development — the muscle underneath the biceps that pushes it upward as it grows, and the outer forearm thickness. The most productive arm training programmes use both grips across each training cycle rather than choosing one exclusively.

Q: What is the Dynasty Flex-Stack System and how does it affect curl training?
A: The Dynasty Flex-Stack System is the internal pulley arrangement that delivers a true 1:1 felt weight ratio — the weight selected on the stack is the resistance the biceps work against through the full arc of both grip variations. This matters specifically at the bottom of the curl where the arm is fully extended and the biceps is most stretched, which is where the most productive eccentric hypertrophy stimulus occurs. Many selectorized curl machines have a cam that reduces felt weight at this position, which is the exact point where the resistance should be highest. The Flex-Stack design maintains consistent resistance through the full arc including the fully stretched starting position.

Q: How do I know the seat height is correct?
A: The seat is at the correct height when the elbows rest on the arm pad with the forearms approximately parallel to the floor in the starting extended position. If the elbows are too high on the pad — meaning the upper arm is angled forward and upward — the shoulder is already partially flexed before the curl begins, which reduces the arm pad's anti-compensation effectiveness. If the elbows slide below the pad edge at the bottom of the curl, the seat is too low. Test the position with a light load through a few full-range reps before committing to the working weight.

Q: What Dynasty Fitness machines pair with the DRE8006 for a complete arm training area?
A: The DRE8006 covers seated biceps curl with reverse and hammer grip options for biceps and brachialis development. Pair it with the Seated Dips Press DRE8007 for triceps isolation through the dip press pattern, covering the pushing side of the arm alongside the DRE8006's pulling side. The ISO-Lateral Seated Biceps Curl DRE8031 adds independent arm curl function for unilateral biceps training that bilateral machines cannot replicate. For advanced arm training, the Standing Total Arms DRE8041 and Seated Arm Curl/Extension DRE8044 extend the arm training area to cover biceps and triceps dual-function programming from dedicated multi-angle stations.

Commercial Selectorized Machines. Engineered to Perform.

Dynasty Resistance Elite

The Dynasty Resistance Elite is Dynasty Fitness's flagship selectorized series, built around the Dynasty Flex-Stack System that delivers a true 1:1 felt weight ratio across the majority of the lineup. What you select on the stack is exactly what you lift, giving every session accurate, progressive resistance from the first rep to the last.

The series covers the complete commercial training floor. ISO-lateral pressing and pulling machines including the ISO-Lateral Chest Press, ISO-Lateral Shoulder Press, and ISO-Lateral Seated Row train each side of the body independently through its own natural arc, eliminating the compensation that fixed bilateral machines allow. Dedicated lower body stations including the Leg Press/Hack Squat, Leg Curl/Leg Extension and Glute Drive cover compound and isolation lower body training from selectorized stations built for heavy daily volume. A complete cable training ecosystem spans from the Adjustable Cable Crossover and Dual Adjustable Pulley through to the 4-Stack, 5-Stack, and 8-Stack Multi Station systems for facilities that need multiple concurrent training zones.

Every machine is built from heavy-duty commercial steel, finished in matte black, and backed by Dynasty's lifetime frame warranty. This is commercial-grade equipment at a price point that makes it accessible to every serious training environment.

Explore the Elite Series

Commercial Machines, Home Gym Prices

Commercially Engineered, Available to All

OUR COMMITMENT

Every machine that leaves Dynasty Fitness carries the same promise: it is built to the commercial standard that professional training environments demand, priced so that standard is no longer exclusive to them, and backed by the support and warranty coverage that a long-term training investment deserves.

We are committed to equipment that stands the test of time — and to making sure the people who train the hardest have access to the tools that match their effort.