Exercises and muscles targeted

Exercise	Muscles Targeted
Leg Extension (bilateral)	Rectus Femoris (primary — bi-articular, crosses both hip and knee), Vastus Lateralis (primary — outer quad), Vastus Medialis (primary — VMO peak activation at terminal extension), Vastus Intermedius (primary), Tibialis Anterior (stabiliser at ankle contact)
Leg Extension — Terminal Hold (peak)	Vastus Medialis Oblique (VMO) (maximum isometric contraction at full knee extension — teardrop definition stimulus), Rectus Femoris, Vastus Lateralis, Vastus Intermedius (co-contraction at lockout), Tibialis Anterior (sustained stabiliser)
Leg Extension — Slow Eccentric	Quadriceps — all four heads (eccentric lengthening from full extension through to starting position — maximum hypertrophy stimulus), Dynasty Flex-Stack 1:1 ratio maintains consistent resistance through full eccentric lowering arc
Leg Extension — Backrest Adjusted (varied hip angle)	Rectus Femoris (more reclined backrest increases hip flexion, stretching Rectus Femoris at the hip — increased bi-articular stimulus), Vastus Lateralis, Vastus Medialis, Vastus Intermedius (activation pattern remains consistent regardless of backrest)
Leg Extension — Partial ROM (terminal arc only)	Vastus Medialis (VMO) (sustained time under tension in the upper extension arc — terminal extension strength and teardrop definition), used for post-failure burnout sets and VMO isolation finishers
Leg Extension — Drop Set	Quadriceps — all four heads (extended time under tension through stack weight reductions — selectorized format enables instant drops without repositioning), extended quad fatigue accumulation beyond single working weight failure point

The leg extension is the only exercise where all four quadriceps heads are the primary movers simultaneously, without significant contribution from the glutes or hamstrings. The rectus femoris is additionally affected by the backrest position on the DRE8014 — it is the only quadriceps muscle that crosses the hip joint, meaning a more reclined backrest increases the stretch on this muscle by increasing hip flexion. Changing the backrest angle between sets therefore changes the training stimulus for the rectus femoris specifically while keeping the vasti at consistent activation, making the DRE8014's 8-position backrest a meaningful programming tool for targeting different components of the quadriceps group within the same session.

Who this machine is built for

Serious Home Gym Builders
You train quads seriously and you want a dedicated leg extension machine where the pivot point is genuinely aligned with the knee joint rather than approximated from a standard design convention. The DRE8014's three-system adjustment covers every realistic user configuration from a 55"×43" footprint with a 210 lb stack and the Dynasty Flex-Stack System's 1:1 felt weight ratio. The split seat pad's elevated front section means heavy extension sessions are limited by the quads rather than by knee pad discomfort cutting the set short.

Bodybuilders and Physique Athletes
Quad sweep, the teardrop definition of the VMO at the inner lower quad, and the separation between the quad heads visible in competition are all built through progressive isolation loading on a machine where the extension arc is mechanically correct. The DRE8014's backrest angle is the variable that changes the rectus femoris stimulus — more reclined for greater rectus femoris stretch and hypertrophy emphasis, more upright for reduced hip involvement and pure vasti focus. The 8-position backrest makes this a deliberate programming choice rather than an accidental fixed geometry. The VMO terminal hold and slow eccentric variations are the two techniques that produce the most specific VMO and quad hypertrophy stimulus per set.

Commercial Gym Owners and Operators
At 503 lbs before the stack the DRE8014 stays firmly planted on the commercial floor. The quick-adjust seat handle for backrest changes without dismounting speeds user turnover on one of the most-used isolation stations in any commercial facility. The three-system adjustment covers the full height and proportion range of a commercial membership from a single machine, and the biomechanically tested pivot means every user — from beginners to experienced athletes — gets a mechanically correct extension arc that the machine provides rather than requiring technique adjustments to compensate for pivot misalignment.

Powerlifters and Strength Athletes
Leg extension accessory volume builds terminal knee extension strength and VMO development that competition squatting develops incompletely at equivalent load and specificity. The DRE8014's 1:1 felt weight ratio makes the accessory load precise and trackable alongside competition programming, and the biomechanically tested pivot reduces knee joint stress that makes heavy extension training on poorly designed machines uncomfortable over a training block. The backrest angle also allows the rectus femoris — the quadriceps head most active in the barbell squat's starting position — to be specifically targeted through a more reclined backrest during accessory programming.

University and College Athletic Departments
Quadriceps terminal extension strength — specifically the final 30 degrees of knee extension where the VMO is most active — is directly relevant to cutting mechanics, sprint deceleration, and jump landing stability across virtually every team sport. The DRE8014 trains this specific quality through a machine-guided arc with a pivot aligned to the knee's natural axis, which keeps the training stimulus productive without the knee joint compensation that misaligned pivots create. The three-system adjustment covers the full athlete height range across a team roster.

Physical Therapists and Sports Medicine Practitioners
Quadriceps strengthening through knee extension is one of the most commonly prescribed exercises in post-surgical rehabilitation for ACL reconstruction and knee arthroplasty. The biomechanically tested pivot on the DRE8014 is particularly relevant for clinical use because the pivot alignment determines the joint shear force profile through the extension arc, and an aligned pivot reduces the shear forces that create complications during early post-surgical loading. The 5-position knee angle adjustment allows the working range to be restricted to the clinically safe arc for each patient's stage of recovery. Exercise selection, load, and range of motion must always follow the clinical programme specific to each patient's condition and recovery stage.

How to setup and use

Setting Up the DRE8014 Leg Extension

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio throughout the extension arc. Start conservatively for the first session to establish the correct three-system fit before increasing load.
Set the backrest to one of eight positions using the quick-adjust seat handle. A more reclined position increases hip flexion, which lengthens the rectus femoris at the hip and increases its contribution to the extension. A more upright position reduces hip flexion and shifts emphasis toward the vasti. Start at the mid-range position and adjust based on training goal.
Set the knee angle adjustment to one of five positions. This positions the pivot and starting knee flexion angle correctly for your leg length. The correct position places the knee joint centre in alignment with the machine's pivot when seated with the back against the backrest.
Set the ankle pad to one of seven positions using the telescopic frame adjustment. The ankle pad should contact the shin just above the ankle without pressing on the bony prominence of the ankle joint itself. The correct contact point keeps the resistance line aligned through the lower leg during the full extension arc.
Sit on the split seat pad with the back against the backrest. The thickened elevated front section of the seat should support the back of the thighs above the knee — confirm this contact is even and comfortable across both legs before loading. The abdominal pad provides forward torso stability — position it against the lower abdomen before beginning.
Grip the side handles firmly before initiating the first rep.

Performing the Exercise

From the starting position with both knees bent at approximately 90 degrees and the ankle pad resting against the lower shins, extend both legs simultaneously by contracting the quadriceps and driving the ankle pad upward through the arc.
Focus the effort on the quads shortening to extend the knee rather than on kicking with momentum. A controlled, deliberate concentric phase maximises quad engagement through the full arc.
Drive to full knee extension at the top where all four quadriceps heads are at their peak contraction, squeezing the quads hard at the lockout position for one to two seconds to maximise VMO activation before beginning the return.
Lower under control over at least two to three seconds, maintaining ankle pad contact and resisting the weight through the full eccentric return to the starting position. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through this lowering phase, which is where a significant portion of the quadriceps hypertrophy stimulus is generated.
Do not let the legs drop passively on the eccentric — the quads should be working against the stack resistance throughout the full return to the starting bent position.
For backrest angle changes during giant set training, use the quick-adjust seat handle to reposition without dismounting, then begin the next set immediately.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Estimated delivery: 7–14 business days from order confirmation. You will receive a tracking number and a delivery window confirmation call before your shipment arrives. Deliveries are curbside standard, white glove delivery to room of choice is available at checkout.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save 10%

Leg Extension DRE8014

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Commercial Grade
Pay With HFA/FSA

Free Shipping

Weight Stack: 210lb

210lb 250lb

!!IMPORTANT!! 250lb upgrade is going to be ready by late April/beginning of May

The Dynasty Fitness DRE8014 Leg Extension is a selectorized quadriceps machine engineered through extensive biomechanical testing to position the pivot point at the precise location that aligns with the knee joint's natural movement axis, so the extension arc follows the actual path the knee takes through full leg extension and produces a mechanically correct quadriceps stimulus from the starting bent position through to the VMO-activating terminal extension at the top. A three-system adjustment architecture of 7-position ankle pad, 8-position backrest, and 5-position knee angle setting covers every combination of user leg length, torso proportion, and training preference to deliver a custom-fit extension position that single-axis machines cannot replicate, while a quick-adjust seat handle allows backrest changes without dismounting to keep training momentum unbroken between sets. The split two-section seat pad with a thickened front section elevated above the rear supports the back of the thighs at the seat edge, preventing the pressure and instability that flat seats create at the knee during heavy extension sets. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio throughout the quadriceps extension arc. Built to commercial grade at 55"×43"×63" with a 210 lb standard stack and a 250 lb upgrade option available through Dynasty Fitness, the DRE8014 is built for commercial gyms, personal training studios, and serious home gym setups where biomechanically precise selectorized quadriceps training is a lower body programming priority.

Pivot point positioned through extensive biomechanical testing to align with the knee joint's natural movement axis, delivering a mechanically correct extension arc that maximises quadriceps activation and reduces joint shear forces through every degree of the extension from start through to terminal VMO contraction
Three-system adjustment — 7-position ankle pad, 8-position backrest, and 5-position knee angle — covers every combination of leg length, torso proportion, and training preference for a custom-configured extension position that single-axis machines cannot achieve
Quick-adjust seat handle changes the backrest angle without dismounting, keeping session flow unbroken during giant sets and high-volume quad training where multiple backrest positions are programmed within the same session
Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio so the stack weight selected is the actual resistance the quads work against through the full extension arc, making progressive overload tracking accurate from the first session through to the most advanced training loads

Limited time offer

Get 20% off when you order 4 or more pieces of equipment!

Exercises and muscles targeted

Exercise	Muscles Targeted
Leg Extension (bilateral)	Rectus Femoris (primary — bi-articular, crosses both hip and knee), Vastus Lateralis (primary — outer quad), Vastus Medialis (primary — VMO peak activation at terminal extension), Vastus Intermedius (primary), Tibialis Anterior (stabiliser at ankle contact)
Leg Extension — Terminal Hold (peak)	Vastus Medialis Oblique (VMO) (maximum isometric contraction at full knee extension — teardrop definition stimulus), Rectus Femoris, Vastus Lateralis, Vastus Intermedius (co-contraction at lockout), Tibialis Anterior (sustained stabiliser)
Leg Extension — Slow Eccentric	Quadriceps — all four heads (eccentric lengthening from full extension through to starting position — maximum hypertrophy stimulus), Dynasty Flex-Stack 1:1 ratio maintains consistent resistance through full eccentric lowering arc
Leg Extension — Backrest Adjusted (varied hip angle)	Rectus Femoris (more reclined backrest increases hip flexion, stretching Rectus Femoris at the hip — increased bi-articular stimulus), Vastus Lateralis, Vastus Medialis, Vastus Intermedius (activation pattern remains consistent regardless of backrest)
Leg Extension — Partial ROM (terminal arc only)	Vastus Medialis (VMO) (sustained time under tension in the upper extension arc — terminal extension strength and teardrop definition), used for post-failure burnout sets and VMO isolation finishers
Leg Extension — Drop Set	Quadriceps — all four heads (extended time under tension through stack weight reductions — selectorized format enables instant drops without repositioning), extended quad fatigue accumulation beyond single working weight failure point

Who this machine is built for

How to setup and use

Setting Up the DRE8014 Leg Extension

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio throughout the extension arc. Start conservatively for the first session to establish the correct three-system fit before increasing load.
Set the backrest to one of eight positions using the quick-adjust seat handle. A more reclined position increases hip flexion, which lengthens the rectus femoris at the hip and increases its contribution to the extension. A more upright position reduces hip flexion and shifts emphasis toward the vasti. Start at the mid-range position and adjust based on training goal.
Set the knee angle adjustment to one of five positions. This positions the pivot and starting knee flexion angle correctly for your leg length. The correct position places the knee joint centre in alignment with the machine's pivot when seated with the back against the backrest.
Set the ankle pad to one of seven positions using the telescopic frame adjustment. The ankle pad should contact the shin just above the ankle without pressing on the bony prominence of the ankle joint itself. The correct contact point keeps the resistance line aligned through the lower leg during the full extension arc.
Sit on the split seat pad with the back against the backrest. The thickened elevated front section of the seat should support the back of the thighs above the knee — confirm this contact is even and comfortable across both legs before loading. The abdominal pad provides forward torso stability — position it against the lower abdomen before beginning.
Grip the side handles firmly before initiating the first rep.

Performing the Exercise

From the starting position with both knees bent at approximately 90 degrees and the ankle pad resting against the lower shins, extend both legs simultaneously by contracting the quadriceps and driving the ankle pad upward through the arc.
Focus the effort on the quads shortening to extend the knee rather than on kicking with momentum. A controlled, deliberate concentric phase maximises quad engagement through the full arc.
Drive to full knee extension at the top where all four quadriceps heads are at their peak contraction, squeezing the quads hard at the lockout position for one to two seconds to maximise VMO activation before beginning the return.
Lower under control over at least two to three seconds, maintaining ankle pad contact and resisting the weight through the full eccentric return to the starting position. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through this lowering phase, which is where a significant portion of the quadriceps hypertrophy stimulus is generated.
Do not let the legs drop passively on the eccentric — the quads should be working against the stack resistance throughout the full return to the starting bent position.
For backrest angle changes during giant set training, use the quick-adjust seat handle to reposition without dismounting, then begin the next set immediately.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Leg Extension DRE8014

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Key Features

Biomechanically Tested Pivot Point

The knee joint pivot on the DRE8014 was positioned through extensive biomechanical testing to align with the knee's natural movement axis through the full seated leg extension arc. This matters specifically because the knee does not rotate around a single fixed point — it follows a complex rolling-and-sliding movement path that shifts as the joint flexes and extends. A pivot that does not track this path creates a resistance direction that diverges from the quadriceps' pull direction at some point in the arc, causing the joint structures to compensate and reducing the training quality per rep. The tested pivot keeps the resistance aligned with the quad's extension force direction across the full arc from 90 degrees of flexion through to terminal extension.

Three-System Adjustment Architecture

Seven ankle pad positions, eight backrest positions, and five knee angle positions operate as independent axes that together configure the machine for each user's specific combination of leg length, torso length, and knee joint position. The ankle pad adjustment sets the contact point correctly for different lower leg lengths without the pad pressing on the ankle joint. The knee angle setting aligns the machine's pivot with the knee joint centre for each user's thigh length. The backrest position sets the hip flexion angle, which changes the rectus femoris stretch and its relative contribution to the extension. No single-axis machine can address all three variables simultaneously — the three-system design is what produces the custom-fit sensation the machine delivers across the full range of user body proportions.

Backrest Angle and Rectus Femoris Targeting

The rectus femoris is the only quadriceps muscle that crosses both the hip and the knee, meaning its length at the start of the exercise is influenced by the hip flexion angle set by the backrest position. A more reclined backrest increases the hip flexion angle, which lengthens the rectus femoris at the hip before the extension begins — creating a longer effective training range and a stronger eccentric stimulus for this specific head during the return. A more upright backrest reduces the rectus femoris stretch and shifts the overall quad stimulus toward the three vasti, which do not cross the hip. This allows the DRE8014's eight backrest positions to serve as a programmable rectus femoris targeting tool across a training cycle.

Quick-Adjust Seat Handle

The backrest adjustment operates via a handle accessible from the seated position, allowing angle changes without dismounting between sets. This is the feature that makes multi-angle giant set programming practical on the DRE8014 — running sets across two or three different backrest positions within a single extended quad session to hit the rectus femoris at different effective lengths without breaking the session to stand, manually reposition, and sit again between every backrest change.

Dynasty Flex-Stack System

The DRE8014 runs on the Dynasty Flex-Stack System, delivering a true 1:1 felt weight ratio through the full leg extension arc including the eccentric return. This is particularly relevant at the fully extended top position where the quads are at their shortest and the felt resistance from cam-based machines typically drops to its lowest — the exact point where the VMO isometric contraction and peak lockout stimulus should be at their strongest. The Flex-Stack system maintains consistent resistance at this position, supporting both the terminal hold and the loaded eccentric return that produces the greatest hypertrophy stimulus for all four quad heads.

Split Two-Section Seat Pad

The seat pad is constructed as two sections — a thickened front section elevated above the rear. The elevation at the front positions the back of the thighs on a raised support surface that contacts across the thigh rather than at the knee joint itself. On a flat seat, the edge of the seat creates a pressure point directly at the back of the knee where tendons and vascular structures run — a mechanical limitation that reduces how long a set can continue before discomfort, not muscle fatigue, becomes the limiting factor. The thickened elevated front resolves this by moving the contact point proximally up the thigh and distributing the support force across a larger surface area.

Product Information
Product Name	Leg Extension
Model	DRE8014
Series	DRE80 Selectorized Series
Product Type	Selectorized Leg Extension Machine
Function	Seated leg extension — bilateral quadriceps isolation
Target Muscles	Rectus Femoris, Vastus Lateralis, Vastus Medialis, Vastus Intermedius (all four quadriceps heads, primary)
Resistance System	Dynasty Flex-Stack System — 1:1 felt weight ratio
Pivot Development	Extensive biomechanical testing — aligned with knee joint movement axis
Grade	Commercial
Colour	Black
Dimensions and Weight
Length	55 in (139.4 cm)
Width	43 in (108.0 cm)
Height	63 in (160.2 cm)
Net Weight	503 lbs (228 kg)
Weight Stack
Standard Weight Stack	210 lbs
Upgraded Weight Stack	250 lbs — contact Dynasty Fitness
Adjustability
Ankle Pad Positions	7 positions — telescopic frame adjustment
Backrest Positions	8 positions — quick-adjust handle, changes without dismounting
Knee Angle Positions	5 positions — pivot alignment adjustment
Pads and Body Support
Seat Design	Split two-section — thickened front elevated above rear for knee joint support
Abdominal Pad	Front torso anchor — prevents hip lift under heavy extension loads
Ankle Pad Surface	Leatherwear foam — durable shin contact surface
Mechanism and Pulleys
Pulleys	4.5" pulley x2, 3.5" pulley x1, V-pulley x1
Bearings	6005 x6
Frame and Construction
Main Frame Tubing	1.97"×5.9"×0.1" rectangular steel
Movement Arm Tubing	Φ2.4"×0.1"
Indoor Use Only	Yes

Q: How does the biomechanically tested pivot improve the leg extension compared to a standard machine?
A: The knee joint does not rotate around a single fixed point — it follows a rolling-and-sliding movement path that shifts as the joint flexes and extends through its range. The pivot on the DRE8014 was positioned through extensive biomechanical testing to track this actual movement path rather than using a standard fixed pivot point. When a leg extension machine's pivot does not align with the knee's movement path, the resistance direction diverges from the quadriceps pull direction at some point in the arc — typically at the extremes of flexion or extension — creating joint shear forces that the knee compensates for rather than the quads doing clean work. The tested pivot keeps the resistance aligned with the quad's extension force throughout the full arc.

Q: What does the backrest position change about quad training?
A: The backrest angle changes the hip flexion position, which specifically affects the rectus femoris — the only quadriceps muscle that crosses both the hip and the knee. A more reclined backrest increases hip flexion, which stretches the rectus femoris at the hip end before the extension begins, producing a longer effective training range for this head specifically. The three vasti muscles do not cross the hip and their activation is not significantly changed by backrest angle. This means a more reclined backrest delivers a stronger rectus femoris stimulus, while a more upright backrest reduces rectus femoris stretch and delivers a relatively greater vasti emphasis. The 8-position range makes this a programmable quad targeting variable.

Q: Why are there two separate ankle pad and knee angle adjustments rather than one combined adjustment?
A: The ankle pad position and the knee angle are two different mechanical variables that need independent adjustment. The ankle pad position sets where the resistance contact point sits on the lower leg for each user's lower leg length — moving it too close to the ankle joint creates bone contact pressure, while too far up the shin reduces the effective lever arm. The knee angle adjustment separately sets where the knee joint sits relative to the machine's pivot point for each user's thigh length. Both variables need to be correct simultaneously for the machine to deliver the biomechanically tested pivot alignment, which is why they are independently adjustable rather than linked.

Q: What is the Dynasty Flex-Stack System and why does it matter for a leg extension?
A: The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio — the stack weight selected is the resistance the quads work against throughout the extension arc. This is particularly relevant at the terminal extension position at the top where all four quad heads are at their shortest and where the VMO isometric contraction produces the greatest stimulus for teardrop definition. Many selectorized leg extension machines use a cam or adjustable cam that reduces felt weight at the top of the arc to reduce knee stress — but this also reduces the training stimulus at the most productive point in the range. The Flex-Stack system maintains consistent resistance at terminal extension, which supports both the lockout hold and the loaded eccentric return.

Q: Is the leg extension safe for knee health when performed on the DRE8014?
A: The DRE8014's biomechanically tested pivot significantly reduces joint shear forces compared to machines where the pivot is approximated rather than tested, which is the primary mechanical factor in knee discomfort during leg extension training. The 5-position knee angle adjustment allows the starting range to be restricted if needed, which is also relevant for users managing specific knee conditions. The split seat pad's elevated front prevents popliteal pressure that otherwise limits set duration. For users with existing knee conditions or a history of knee injury, confirm the appropriateness of leg extension training for your specific situation with your practitioner before training.

Q: What Dynasty Fitness machines pair with the DRE8014 for a complete lower body training area?
A: The DRE8014 covers quadriceps isolation through leg extension. Pair it with the Seated Leg Curl DRE8013 for the opposing hamstring isolation that covers both sides of the knee joint from dedicated machines. The Leg Press/Hack Squat DRE8016 adds bilateral compound lower body pressing for quad and glute development alongside the isolation work from both dedicated machines. The Multi Back Extension DRE8040 adds posterior chain hip extension for the glutes and erectors to complete the full lower body and posterior chain training area from dedicated selectorized stations.

Commercial Selectorized Machines. Engineered to Perform.

Dynasty Resistance Elite

The Dynasty Resistance Elite is Dynasty Fitness's flagship selectorized series, built around the Dynasty Flex-Stack System that delivers a true 1:1 felt weight ratio across the majority of the lineup. What you select on the stack is exactly what you lift, giving every session accurate, progressive resistance from the first rep to the last.

The series covers the complete commercial training floor. ISO-lateral pressing and pulling machines including the ISO-Lateral Chest Press, ISO-Lateral Shoulder Press, and ISO-Lateral Seated Row train each side of the body independently through its own natural arc, eliminating the compensation that fixed bilateral machines allow. Dedicated lower body stations including the Leg Press/Hack Squat, Leg Curl/Leg Extension and Glute Drive cover compound and isolation lower body training from selectorized stations built for heavy daily volume. A complete cable training ecosystem spans from the Adjustable Cable Crossover and Dual Adjustable Pulley through to the 4-Stack, 5-Stack, and 8-Stack Multi Station systems for facilities that need multiple concurrent training zones.

Every machine is built from heavy-duty commercial steel, finished in matte black, and backed by Dynasty's lifetime frame warranty. This is commercial-grade equipment at a price point that makes it accessible to every serious training environment.

Explore the Elite Series

Commercial Machines, Home Gym Prices

Commercially Engineered, Available to All

OUR COMMITMENT

Every machine that leaves Dynasty Fitness carries the same promise: it is built to the commercial standard that professional training environments demand, priced so that standard is no longer exclusive to them, and backed by the support and warranty coverage that a long-term training investment deserves.

We are committed to equipment that stands the test of time — and to making sure the people who train the hardest have access to the tools that match their effort.