Exercises and muscles targeted

Exercise	Muscles Targeted
Horizontal Bench Press	Pectoralis Major — Sternal Head (primary — horizontal press path), Pectoralis Major — Clavicular Head (secondary), Anterior Deltoid (secondary), Triceps Brachii (secondary — elbow extension at lockout), Serratus Anterior (scapular stabiliser)
Incline Press	Pectoralis Major — Clavicular Head (primary — angled press increases upper chest emphasis), Anterior Deltoid (increased secondary), Pectoralis Major — Sternal Head (secondary), Triceps Brachii (secondary), Serratus Anterior (scapular stabiliser)
Shoulder Press	Anterior Deltoid (primary), Lateral Deltoid (primary), Triceps Brachii (secondary — elbow extension at lockout), Upper Trapezius (secondary — scapular elevation at top), Serratus Anterior (upward scapular rotation)
Any Press — Isometric Hold (lockout)	Pectoralis Major or Deltoids (sustained isometric at full arm extension — primary target varies by press angle), Triceps Brachii (isometric at lockout across all three angles), Serratus Anterior (sustained scapular stabilisation)
Any Press — Slow Eccentric	Pectoralis Major or Deltoids (eccentric lengthening from peak extension to starting position — maximum hypertrophy stimulus per angle), Triceps Brachii (eccentric), Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through full eccentric return at all three press positions
Multi-Angle Giant Set	Pectoralis Major — Sternal Head (bench press set), Pectoralis Major — Clavicular Head and Anterior Deltoid (incline set), Anterior and Lateral Deltoid (shoulder press set) — complete chest, upper chest, and shoulder pressing volume from one station across all three positions

The DRE8029 covers three pressing planes that collectively train every primary region of the chest and shoulder. The horizontal bench press targets the sternal pectoral head — the largest region of the pectoralis major — through the standard horizontal push path. The incline position angles the press upward, increasing the clavicular head and anterior deltoid contribution and providing the upper chest and front shoulder volume that flat pressing alone does not deliver. The shoulder press at the vertical angle shifts the primary workload to the anterior and lateral deltoids for overhead pressing strength and deltoid development. The biomechanically tested handle angles keep the shoulder joint in its correct movement pattern at each of these three positions, reducing injury risk while increasing the accuracy of the stimulus on the target muscle per press angle.

Who this machine is built for

Serious Home Gym Builders
You want chest press, incline press, and shoulder press covered from one selectorized station at a price point that does not require three separate machines or three weight stacks. The DRE8029 delivers all three pressing patterns from 53.7"×53.6" with a 210 lb stack and the Dynasty Flex-Stack System's 1:1 felt weight ratio. The biomechanically tested arm and seat positions eliminate the adjustment guesswork that makes other multi-angle machines frustrating — each setting combination produces the correct alignment for its press function without trial and error.

Bodybuilders and Physique Athletes
Upper chest development, pectoral mass through the full sternal-to-clavicular range, and anterior and lateral deltoid volume all require pressing across multiple angles within a training cycle. The DRE8029 makes multi-angle pressing sessions practical — 4-position arm and 4-position seat changes take seconds and the biomechanically correct handle angles at each position keep the stimulus on the target muscle rather than shifted to the shoulder joint under heavy loads.

Commercial Gym Owners and Operators
Three of the most-used upper body pressing stations — bench press, incline press, and shoulder press — consolidated into a single 53.7"×53.6" footprint with one weight stack. In a commercial facility where upper body pressing equipment sees the highest utilisation during peak hours, a multi-press machine reduces equipment crowding per square metre while maintaining a full pressing programme for every member. The Q235A steel construction and 800+ hour salt spray tested coating support the wear demands of a high-use commercial environment at a value purchase point within the DRE80 series.

Private Personal Training Studios
Trainers can programme flat, incline, and overhead pressing in sequence within a single session block from one machine. The 4+4 adjustment system with biomechanically verified positions means each transition takes seconds and the trainer can focus on coaching rather than helping the client find the correct arm-seat combination for each press. The single weight stack also keeps load management simple across all three pressing exercises.

University and College Athletic Departments
A single multi-press machine covers the overhead and horizontal pressing volume requirements of upper body athletic training — relevant to throwing, blocking, and overhead sports — without requiring three separate stations in a shared weight room. The commercial grade steel and coating handle the high-frequency use of team training environments, and the value positioning within the DRE80 series makes the DRE8029 an efficient choice for programmes equipping large training areas.

Physical Therapists and Sports Medicine Practitioners
The biomechanically tested handle angles are specifically designed to match the shoulder joint's natural movement pattern at each press position, which is the feature most directly relevant to pressing in clinical or rehabilitation settings where shoulder joint protection during loading is a programming priority. The 4-position arm and seat adjustments allow the press angle and body position to be set precisely for each patient's safe range of motion and target muscle requirement. Exercise selection, load, and range of motion must always follow the clinical programme specific to each patient's condition and recovery stage.

How to setup and use

Setting Up the DRE8029 Multi Press

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio at every press angle. Working loads typically differ between press angles — most users press heavier on the flat bench position than the incline or shoulder press positions, so adjust the stack selection when changing press functions.
Set the movement arm to one of four positions for the chosen exercise. The arm positions are biomechanically determined — flat for bench press, mid positions for incline press, and the highest position for shoulder press. Each position is designed so that when combined with the correct seat position, the handles arrive at the right height and angle for the press without further adjustment.
Set the seat to one of four positions for the chosen exercise. The biomechanically tested arm-and-seat combinations eliminate guesswork — use the position pairing that corresponds to the selected press function and sit down to confirm the starting position aligns correctly before loading.
Adjust the seat height as needed using the gas spring handle. The correct height places the handles at the starting position where the forearms are approximately horizontal at the beginning of the press for chest and incline, and at shoulder height for the shoulder press position.
Sit on the seat with the back fully against the back pad and the head resting on the head pad. Grip both handles firmly at the biomechanically set angle for the selected press — do not reposition the wrists to change the handle angle, as the tested grip angle is designed for the specific press function.
Confirm the starting arm position — handles at the correct height, back against the pad, feet flat on the floor — before beginning the first rep.

Performing the Exercise

From the starting position, press both handles forward along the pressing arc appropriate to the selected angle — horizontally for bench press, upward at an angle for incline press, and vertically for shoulder press.
Drive the press through the full extension arc to lockout, focusing the effort on the primary target muscle for the selected press angle rather than simply straightening the elbows.
At full extension, hold for one to two seconds at peak contraction before beginning the return.
Lower under control over at least two seconds, maintaining back pad contact through the full eccentric return to the starting position. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through this lowering phase at every press angle.
For multi-angle giant set training, complete the working set, change the arm position, adjust the seat position, make any minor seat height change with the gas spring, and begin the next press angle. The biomechanically preset positions minimise the adjustment time between press functions.
After the final rep at any press angle, return the handles fully to the starting position before releasing grip.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Estimated delivery: 7–14 business days from order confirmation. You will receive a tracking number and a delivery window confirmation call before your shipment arrives. Deliveries are curbside standard, white glove delivery to room of choice is available at checkout.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save 10%

Multi Press DRE8029

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Commercial Grade
Pay With HFA/FSA

Free Shipping

Weight Stack: 210lb

210lb 250lb

!!IMPORTANT!! 250lb upgrade is going to be ready by late April/beginning of May

The Dynasty Fitness DRE8029 Multi Press is a selectorized multi-angle pressing machine that covers horizontal bench press, incline press, and shoulder press from a single station through a 4-position movement arm adjustment combined with a 4-position seat adjustment — both developed through extensive biomechanical testing to identify the optimal training angles for each press position, so transitioning between exercises is a matter of moving two settings rather than guessing which combination of arm and seat position produces the correct pressing alignment. The handle angles are similarly biomechanically tested to match the shoulder joint's natural movement pattern at each press position, protecting the shoulder during heavy pressing while increasing the focus of the resistance on the pectoral, deltoid, and triceps target muscles per press angle. The frame is constructed from Q235A high-frequency cold-rolled steel with 40×140mm square tubing and 50×100mm oval tubing in combination, finished with electrostatic powder coating that passes 800+ hours of salt spray and impact testing for a commercial service life at a value price point. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio through the pressing arc at every angle. Built to commercial grade at 53.7"×53.6"×63" with a 210 lb standard stack and a 250 lb upgrade option available through Dynasty Fitness, the DRE8029 is built for commercial gyms, personal training studios, and serious home gym setups where chest, shoulder, and triceps pressing coverage from one selectorized station is the priority.

4-position movement arm and 4-position seat adjustment enable horizontal bench press, incline press, and shoulder press from one selectorized station — both adjustment systems developed through extensive biomechanical testing so each position combination aligns correctly for its press without adjustment guesswork
Biomechanically tested handle angles match the shoulder joint's natural movement pattern at every press position, reducing shoulder injury risk during heavy pressing while increasing the stimulus on the pectoral, deltoid, and triceps target muscles per angle
Q235A high-frequency cold-rolled steel frame with 40×140mm square tubing and 50×100mm oval tubing, finished with electrostatic powder coating that passes 800+ hours of salt spray and impact testing — commercial durability at a value price point within the DRE80 Selectorized Series
Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio across all three press positions, with a 210 lb standard stack that covers the full load range for chest, incline, and shoulder pressing in a single station at 53.7"×53.6"

Limited time offer

Get 20% off when you order 4 or more pieces of equipment!

Exercises and muscles targeted

Exercise	Muscles Targeted
Horizontal Bench Press	Pectoralis Major — Sternal Head (primary — horizontal press path), Pectoralis Major — Clavicular Head (secondary), Anterior Deltoid (secondary), Triceps Brachii (secondary — elbow extension at lockout), Serratus Anterior (scapular stabiliser)
Incline Press	Pectoralis Major — Clavicular Head (primary — angled press increases upper chest emphasis), Anterior Deltoid (increased secondary), Pectoralis Major — Sternal Head (secondary), Triceps Brachii (secondary), Serratus Anterior (scapular stabiliser)
Shoulder Press	Anterior Deltoid (primary), Lateral Deltoid (primary), Triceps Brachii (secondary — elbow extension at lockout), Upper Trapezius (secondary — scapular elevation at top), Serratus Anterior (upward scapular rotation)
Any Press — Isometric Hold (lockout)	Pectoralis Major or Deltoids (sustained isometric at full arm extension — primary target varies by press angle), Triceps Brachii (isometric at lockout across all three angles), Serratus Anterior (sustained scapular stabilisation)
Any Press — Slow Eccentric	Pectoralis Major or Deltoids (eccentric lengthening from peak extension to starting position — maximum hypertrophy stimulus per angle), Triceps Brachii (eccentric), Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through full eccentric return at all three press positions
Multi-Angle Giant Set	Pectoralis Major — Sternal Head (bench press set), Pectoralis Major — Clavicular Head and Anterior Deltoid (incline set), Anterior and Lateral Deltoid (shoulder press set) — complete chest, upper chest, and shoulder pressing volume from one station across all three positions

Who this machine is built for

How to setup and use

Setting Up the DRE8029 Multi Press

Select the working weight on the stack using the selector pin. The Dynasty Flex-Stack System delivers a true 1:1 felt weight ratio at every press angle. Working loads typically differ between press angles — most users press heavier on the flat bench position than the incline or shoulder press positions, so adjust the stack selection when changing press functions.
Set the movement arm to one of four positions for the chosen exercise. The arm positions are biomechanically determined — flat for bench press, mid positions for incline press, and the highest position for shoulder press. Each position is designed so that when combined with the correct seat position, the handles arrive at the right height and angle for the press without further adjustment.
Set the seat to one of four positions for the chosen exercise. The biomechanically tested arm-and-seat combinations eliminate guesswork — use the position pairing that corresponds to the selected press function and sit down to confirm the starting position aligns correctly before loading.
Adjust the seat height as needed using the gas spring handle. The correct height places the handles at the starting position where the forearms are approximately horizontal at the beginning of the press for chest and incline, and at shoulder height for the shoulder press position.
Sit on the seat with the back fully against the back pad and the head resting on the head pad. Grip both handles firmly at the biomechanically set angle for the selected press — do not reposition the wrists to change the handle angle, as the tested grip angle is designed for the specific press function.
Confirm the starting arm position — handles at the correct height, back against the pad, feet flat on the floor — before beginning the first rep.

Performing the Exercise

From the starting position, press both handles forward along the pressing arc appropriate to the selected angle — horizontally for bench press, upward at an angle for incline press, and vertically for shoulder press.
Drive the press through the full extension arc to lockout, focusing the effort on the primary target muscle for the selected press angle rather than simply straightening the elbows.
At full extension, hold for one to two seconds at peak contraction before beginning the return.
Lower under control over at least two seconds, maintaining back pad contact through the full eccentric return to the starting position. The Dynasty Flex-Stack 1:1 ratio delivers consistent resistance through this lowering phase at every press angle.
For multi-angle giant set training, complete the working set, change the arm position, adjust the seat position, make any minor seat height change with the gas spring, and begin the next press angle. The biomechanically preset positions minimise the adjustment time between press functions.
After the final rep at any press angle, return the handles fully to the starting position before releasing grip.

Owner's Manual

Access the complete assembly guide, parts list, and maintenance schedule below.

Download Owners Manual

Shipping & Delivery

All Dynasty Fitness equipment ships free across the 48 contiguous US states via freight carrier. If the product description says preorder, we'll send you an estimated delivery date via email.

Returns: Free within 30 days of delivery. Items must be in original condition and packaging. Refunds processed within 5 business days of return receipt.

Questions? Contact our team at:
📧Email: info@thedynastyfitness.com
📞Call: +1 (213)-584-0858

Need a buying guide?

Looking for one to one support before making final decision?
Feel free to contact us. Our expert support team would love to assist you.

Need Installation Help?

We have partnered with another company to help provide installation around the country. Please use the link below to see the price per machine for installation
See Installation Rates

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Multi Press DRE8029

$2,649.00

$2,649.00 ~~$2,949.00~~ 10% off (Save$300.00 )

Key Features

4+4 Biomechanically Tested Press Positions

The movement arm and seat each adjust across four positions, with the combinations for each press function — bench press, incline press, and shoulder press — determined through extensive biomechanical testing to identify the angles that align the handles with the natural pressing path of the target muscles at each position. This testing removes the trial-and-error adjustment process that multi-angle machines without biomechanically verified positions require. Each arm-and-seat combination produces a correctly aligned starting position for its exercise, so users of different proportions within the adjustment range arrive at the correct press geometry simply by selecting the arm and seat positions for their chosen exercise and sitting down.

Biomechanically Tested Handle Angles

The handle angles on the DRE8029 are engineered through biomechanical testing to match the shoulder joint's natural movement pattern at each of the three press positions. A handle that forces the wrist into a position that does not align with the shoulder's pressing path creates internal rotation stress at the shoulder joint that accumulates across heavy pressing sets, increasing injury risk and reducing the quality of the stimulus on the target muscle. The tested handle angles position the forearm in the orientation that keeps the shoulder tracking correctly through the full press arc at every position protecting the joint while simultaneously increasing how precisely the resistance loads the pectoral or deltoid target at each angle.

Q235A High-Frequency Cold-Rolled Steel Frame

The main frame uses Q235A high-frequency cold-rolled steel — a structural steel grade with consistent yield strength and tight dimensional tolerances in a dual-tubing architecture of 40×140mm square tubing and 50×100mm oval tubing working together across the frame structure. The square tubing provides the structural rigidity of the primary load-bearing members, while the oval tubing handles the secondary structural connections. This combination is chosen for the DRE8029 as a durable value-grade frame specification that supports the full stack load and the mechanical demands of three distinct press patterns from one station across a commercial service life.

Electrostatic Powder Coating

The finish is applied through an electrostatic powder coating process that creates a uniform, fully bonded surface coating rather than the variable coverage of spray-applied paint. The coating passes 800+ hours of salt spray testing and impact resistance testing before leaving the factory, confirming it holds against the corrosion and surface impact that high-use commercial equipment encounters over years of operation. The finish is described as both aesthetic and durable — the visual quality standard of the DRE80 series alongside the corrosion resistance that justifies commercial deployment.

Dynasty Flex-Stack System

The DRE8029 runs on the Dynasty Flex-Stack System, delivering a true 1:1 felt weight ratio through the pressing arc at every arm-and-seat position combination. This is particularly relevant on a multi-angle machine because it ensures the load tracking is equally accurate whether the session is programmed as bench press, incline press, or shoulder press — the selected stack weight is the resistance the target muscle works against regardless of which press position the machine is set to. The high-density cast iron weight stack with black textured powder coating provides the professional tactile feel and corrosion resistance consistent across the DRE80 series.

Product Information
Product Name	Multi Press
Model	DRE8029
Series	DRE80 Selectorized Series
Product Type	Selectorized Multi-Angle Press Machine
Functions	Horizontal bench press, incline press, and shoulder press
Target Muscles	Pectoralis Major (bench and incline), Anterior and Lateral Deltoid (shoulder press), Triceps Brachii (secondary across all positions)
Resistance System	Dynasty Flex-Stack System — 1:1 felt weight ratio
Grade	Commercial
Colour	Black
Dimensions and Weight
Length	53.7 in (136.4 cm)
Width	53.6 in (136.2 cm)
Height	63 in (160.2 cm)
Weight Stack
Standard Weight Stack	210 lbs
Upgraded Weight Stack	250 lbs — contact Dynasty Fitness
Adjustability
Movement Arm Positions	4 positions — biomechanically tested press angles
Seat Positions	4 positions — biomechanically paired with arm positions per press function
Handle Angles	Biomechanically tested — matched to shoulder joint movement pattern per press angle
Seat Height	Gas spring adjustment — single-hand operation
Mechanism and Bearings
Pulleys	4.5" pulley x5, 3.5" pulley x1
Bearings	6005-2Z x4, 61905-2Z x4, Linear Motion x2
Frame and Construction
Frame Steel Grade	Q235A high-frequency cold-rolled steel
Square Tubing	40×140mm
Oval Tubing	50×100mm
Surface Finish	Electrostatic powder coating — 800+ hours salt spray and impact tested
Indoor Use Only	Yes

Q: What three press exercises does the DRE8029 Multi Press cover?
A: The DRE8029 covers horizontal bench press, incline press, and shoulder press from one selectorized station. Each exercise is accessed by moving the movement arm to one of four positions and the seat to the corresponding position — both determined through extensive biomechanical testing so each combination produces the correct pressing alignment without trial and error.

Q: How does the 4-position arm and 4-position seat system work between exercises?
A: The movement arm and seat each have four positions. The biomechanical testing behind the DRE8029 identified which arm position and seat position together produce the correct handle height and press angle for bench press, incline press, and shoulder press respectively. When you move to a new exercise, you select the arm and seat positions that correspond to that press function, and the system arrives at the correct geometry without needing to fine-tune each individual setting independently. The gas spring seat height adjustment handles any remaining fit variation between users.

Q: Why do the handle angles matter and what makes them biomechanically tested?
A: The handle angle determines the orientation of the wrist and forearm during the press. If the handle forces the forearm into a position that does not match the shoulder joint's natural pressing path at a given angle, the shoulder compensates by rotating internally or externally to accommodate — which creates stress at the joint that accumulates across heavy pressing sets. The handle angles on the DRE8029 were tested through biomechanical analysis to find the forearm orientation that keeps the shoulder tracking correctly through the full press arc at each of the three positions. The practical result is pressing that feels mechanically natural at every angle and distributes the load to the target muscle rather than to the shoulder joint.

Q: What is the Dynasty Flex-Stack System and how does it apply across three press angles?
A: The Dynasty Flex-Stack System is the internal pulley arrangement that delivers a true 1:1 felt weight ratio — the selected stack weight is the resistance the pressing muscles work against throughout the arc. On a multi-angle machine, this consistency matters because it keeps load tracking accurate across all three press functions. If the felt resistance changed between bench press and shoulder press positions due to mechanical leverage variation, the progressive overload tracking across different sessions would be unreliable. The Flex-Stack design holds the 1:1 ratio regardless of which press position the machine is set to.

Q: How is the DRE8029 positioned relative to the ISO-Lateral Chest Press DRE8001 and ISO-Lateral Shoulder Press DRE8004?
A: The DRE8029 is the value-optimised multi-function option within the DRE80 pressing range — it covers three press functions from one station at a single stack price point, making it ideal for home gyms or commercial layouts where consolidating pressing into a compact footprint is the priority. The DRE8001 and DRE8004 are dedicated single-function machines with ISO-lateral independent arms, dual-handle systems, and features such as the assisted footplate and pneumatic seat that represent the premium pressing tier. The choice between them depends on whether multi-function consolidation or dedicated ISO-lateral pressing is the programming priority.

Q: What Dynasty Fitness machines pair with the DRE8029 for a complete upper body training area?
A: The DRE8029 covers bench press, incline press, and shoulder pressing from one station. Pair it with the Pectoral Fly/Rear Deltoid DRE8003 to add chest isolation through the fly and posterior deltoid work through the reverse fly — the two exercises that complete a chest and shoulder session alongside pressing. The Biceps Curl DRE8006 and Seated Dips Press DRE8007 add dedicated arm isolation for biceps and triceps to complete the upper body training area from the pressing station outward.

Commercial Selectorized Machines. Engineered to Perform.

Dynasty Resistance Elite

The Dynasty Resistance Elite is Dynasty Fitness's flagship selectorized series, built around the Dynasty Flex-Stack System that delivers a true 1:1 felt weight ratio across the majority of the lineup. What you select on the stack is exactly what you lift, giving every session accurate, progressive resistance from the first rep to the last.

The series covers the complete commercial training floor. ISO-lateral pressing and pulling machines including the ISO-Lateral Chest Press, ISO-Lateral Shoulder Press, and ISO-Lateral Seated Row train each side of the body independently through its own natural arc, eliminating the compensation that fixed bilateral machines allow. Dedicated lower body stations including the Leg Press/Hack Squat, Leg Curl/Leg Extension and Glute Drive cover compound and isolation lower body training from selectorized stations built for heavy daily volume. A complete cable training ecosystem spans from the Adjustable Cable Crossover and Dual Adjustable Pulley through to the 4-Stack, 5-Stack, and 8-Stack Multi Station systems for facilities that need multiple concurrent training zones.

Every machine is built from heavy-duty commercial steel, finished in matte black, and backed by Dynasty's lifetime frame warranty. This is commercial-grade equipment at a price point that makes it accessible to every serious training environment.

Explore the Elite Series

Commercial Machines, Home Gym Prices

Commercially Engineered, Available to All

OUR COMMITMENT

Every machine that leaves Dynasty Fitness carries the same promise: it is built to the commercial standard that professional training environments demand, priced so that standard is no longer exclusive to them, and backed by the support and warranty coverage that a long-term training investment deserves.

We are committed to equipment that stands the test of time — and to making sure the people who train the hardest have access to the tools that match their effort.